{"status":"1","message":"OK","result":[{"SourceCode":"{{\"language\":\"Solidity\",\"sources\":{\"token.sol\":{\"content\":\"// Sources flattened with hardhat v2.22.5 https://hardhat.org\\n\\n// SPDX-License-Identifier: MIT\\n\\n// File @openzeppelin/contracts-upgradeable/access/IAccessControlUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)\\n\\npragma solidity ^0.8.0;\\n\\n/**\\n * @dev External interface of AccessControl declared to support ERC165 detection.\\n */\\ninterface IAccessControlUpgradeable {\\n    /**\\n     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`\\n     *\\n     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite\\n     * {RoleAdminChanged} not being emitted signaling this.\\n     *\\n     * _Available since v3.1._\\n     */\\n    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);\\n\\n    /**\\n     * @dev Emitted when `account` is granted `role`.\\n     *\\n     * `sender` is the account that originated the contract call, an admin role\\n     * bearer except when using {AccessControl-_setupRole}.\\n     */\\n    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);\\n\\n    /**\\n     * @dev Emitted when `account` is revoked `role`.\\n     *\\n     * `sender` is the account that originated the contract call:\\n     *   - if using `revokeRole`, it is the admin role bearer\\n     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)\\n     */\\n    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);\\n\\n    /**\\n     * @dev Returns `true` if `account` has been granted `role`.\\n     */\\n    function hasRole(bytes32 role, address account) external view returns (bool);\\n\\n    /**\\n     * @dev Returns the admin role that controls `role`. See {grantRole} and\\n     * {revokeRole}.\\n     *\\n     * To change a role's admin, use {AccessControl-_setRoleAdmin}.\\n     */\\n    function getRoleAdmin(bytes32 role) external view returns (bytes32);\\n\\n    /**\\n     * @dev Grants `role` to `account`.\\n     *\\n     * If `account` had not been already granted `role`, emits a {RoleGranted}\\n     * event.\\n     *\\n     * Requirements:\\n     *\\n     * - the caller must have ``role``'s admin role.\\n     */\\n    function grantRole(bytes32 role, address account) external;\\n\\n    /**\\n     * @dev Revokes `role` from `account`.\\n     *\\n     * If `account` had been granted `role`, emits a {RoleRevoked} event.\\n     *\\n     * Requirements:\\n     *\\n     * - the caller must have ``role``'s admin role.\\n     */\\n    function revokeRole(bytes32 role, address account) external;\\n\\n    /**\\n     * @dev Revokes `role` from the calling account.\\n     *\\n     * Roles are often managed via {grantRole} and {revokeRole}: this function's\\n     * purpose is to provide a mechanism for accounts to lose their privileges\\n     * if they are compromised (such as when a trusted device is misplaced).\\n     *\\n     * If the calling account had been granted `role`, emits a {RoleRevoked}\\n     * event.\\n     *\\n     * Requirements:\\n     *\\n     * - the caller must be `account`.\\n     */\\n    function renounceRole(bytes32 role, address account) external;\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)\\n\\npragma solidity ^0.8.1;\\n\\n/**\\n * @dev Collection of functions related to the address type\\n */\\nlibrary AddressUpgradeable {\\n    /**\\n     * @dev Returns true if `account` is a contract.\\n     *\\n     * [IMPORTANT]\\n     * ====\\n     * It is unsafe to assume that an address for which this function returns\\n     * false is an externally-owned account (EOA) and not a contract.\\n     *\\n     * Among others, `isContract` will return false for the following\\n     * types of addresses:\\n     *\\n     *  - an externally-owned account\\n     *  - a contract in construction\\n     *  - an address where a contract will be created\\n     *  - an address where a contract lived, but was destroyed\\n     *\\n     * Furthermore, `isContract` will also return true if the target contract within\\n     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,\\n     * which only has an effect at the end of a transaction.\\n     * ====\\n     *\\n     * [IMPORTANT]\\n     * ====\\n     * You shouldn't rely on `isContract` to protect against flash loan attacks!\\n     *\\n     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets\\n     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract\\n     * constructor.\\n     * ====\\n     */\\n    function isContract(address account) internal view returns (bool) {\\n        // This method relies on extcodesize/address.code.length, which returns 0\\n        // for contracts in construction, since the code is only stored at the end\\n        // of the constructor execution.\\n\\n        return account.code.length > 0;\\n    }\\n\\n    /**\\n     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to\\n     * `recipient`, forwarding all available gas and reverting on errors.\\n     *\\n     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost\\n     * of certain opcodes, possibly making contracts go over the 2300 gas limit\\n     * imposed by `transfer`, making them unable to receive funds via\\n     * `transfer`. {sendValue} removes this limitation.\\n     *\\n     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].\\n     *\\n     * IMPORTANT: because control is transferred to `recipient`, care must be\\n     * taken to not create reentrancy vulnerabilities. Consider using\\n     * {ReentrancyGuard} or the\\n     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].\\n     */\\n    function sendValue(address payable recipient, uint256 amount) internal {\\n        require(address(this).balance >= amount, \\\"Address: insufficient balance\\\");\\n\\n        (bool success, ) = recipient.call{value: amount}(\\\"\\\");\\n        require(success, \\\"Address: unable to send value, recipient may have reverted\\\");\\n    }\\n\\n    /**\\n     * @dev Performs a Solidity function call using a low level `call`. A\\n     * plain `call` is an unsafe replacement for a function call: use this\\n     * function instead.\\n     *\\n     * If `target` reverts with a revert reason, it is bubbled up by this\\n     * function (like regular Solidity function calls).\\n     *\\n     * Returns the raw returned data. To convert to the expected return value,\\n     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].\\n     *\\n     * Requirements:\\n     *\\n     * - `target` must be a contract.\\n     * - calling `target` with `data` must not revert.\\n     *\\n     * _Available since v3.1._\\n     */\\n    function functionCall(address target, bytes memory data) internal returns (bytes memory) {\\n        return functionCallWithValue(target, data, 0, \\\"Address: low-level call failed\\\");\\n    }\\n\\n    /**\\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with\\n     * `errorMessage` as a fallback revert reason when `target` reverts.\\n     *\\n     * _Available since v3.1._\\n     */\\n    function functionCall(\\n        address target,\\n        bytes memory data,\\n        string memory errorMessage\\n    ) internal returns (bytes memory) {\\n        return functionCallWithValue(target, data, 0, errorMessage);\\n    }\\n\\n    /**\\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\\n     * but also transferring `value` wei to `target`.\\n     *\\n     * Requirements:\\n     *\\n     * - the calling contract must have an ETH balance of at least `value`.\\n     * - the called Solidity function must be `payable`.\\n     *\\n     * _Available since v3.1._\\n     */\\n    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {\\n        return functionCallWithValue(target, data, value, \\\"Address: low-level call with value failed\\\");\\n    }\\n\\n    /**\\n     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but\\n     * with `errorMessage` as a fallback revert reason when `target` reverts.\\n     *\\n     * _Available since v3.1._\\n     */\\n    function functionCallWithValue(\\n        address target,\\n        bytes memory data,\\n        uint256 value,\\n        string memory errorMessage\\n    ) internal returns (bytes memory) {\\n        require(address(this).balance >= value, \\\"Address: insufficient balance for call\\\");\\n        (bool success, bytes memory returndata) = target.call{value: value}(data);\\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\\n    }\\n\\n    /**\\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\\n     * but performing a static call.\\n     *\\n     * _Available since v3.3._\\n     */\\n    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {\\n        return functionStaticCall(target, data, \\\"Address: low-level static call failed\\\");\\n    }\\n\\n    /**\\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\\n     * but performing a static call.\\n     *\\n     * _Available since v3.3._\\n     */\\n    function functionStaticCall(\\n        address target,\\n        bytes memory data,\\n        string memory errorMessage\\n    ) internal view returns (bytes memory) {\\n        (bool success, bytes memory returndata) = target.staticcall(data);\\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\\n    }\\n\\n    /**\\n     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],\\n     * but performing a delegate call.\\n     *\\n     * _Available since v3.4._\\n     */\\n    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {\\n        return functionDelegateCall(target, data, \\\"Address: low-level delegate call failed\\\");\\n    }\\n\\n    /**\\n     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],\\n     * but performing a delegate call.\\n     *\\n     * _Available since v3.4._\\n     */\\n    function functionDelegateCall(\\n        address target,\\n        bytes memory data,\\n        string memory errorMessage\\n    ) internal returns (bytes memory) {\\n        (bool success, bytes memory returndata) = target.delegatecall(data);\\n        return verifyCallResultFromTarget(target, success, returndata, errorMessage);\\n    }\\n\\n    /**\\n     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling\\n     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.\\n     *\\n     * _Available since v4.8._\\n     */\\n    function verifyCallResultFromTarget(\\n        address target,\\n        bool success,\\n        bytes memory returndata,\\n        string memory errorMessage\\n    ) internal view returns (bytes memory) {\\n        if (success) {\\n            if (returndata.length == 0) {\\n                // only check isContract if the call was successful and the return data is empty\\n                // otherwise we already know that it was a contract\\n                require(isContract(target), \\\"Address: call to non-contract\\\");\\n            }\\n            return returndata;\\n        } else {\\n            _revert(returndata, errorMessage);\\n        }\\n    }\\n\\n    /**\\n     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the\\n     * revert reason or using the provided one.\\n     *\\n     * _Available since v4.3._\\n     */\\n    function verifyCallResult(\\n        bool success,\\n        bytes memory returndata,\\n        string memory errorMessage\\n    ) internal pure returns (bytes memory) {\\n        if (success) {\\n            return returndata;\\n        } else {\\n            _revert(returndata, errorMessage);\\n        }\\n    }\\n\\n    function _revert(bytes memory returndata, string memory errorMessage) private pure {\\n        // Look for revert reason and bubble it up if present\\n        if (returndata.length > 0) {\\n            // The easiest way to bubble the revert reason is using memory via assembly\\n            /// @solidity memory-safe-assembly\\n            assembly {\\n                let returndata_size := mload(returndata)\\n                revert(add(32, returndata), returndata_size)\\n            }\\n        } else {\\n            revert(errorMessage);\\n        }\\n    }\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.9.0) (proxy/utils/Initializable.sol)\\n\\npragma solidity ^0.8.2;\\n\\n/**\\n * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed\\n * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an\\n * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer\\n * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.\\n *\\n * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be\\n * reused. This mechanism prevents re-execution of each \\\"step\\\" but allows the creation of new initialization steps in\\n * case an upgrade adds a module that needs to be initialized.\\n *\\n * For example:\\n *\\n * [.hljs-theme-light.nopadding]\\n * ```solidity\\n * contract MyToken is ERC20Upgradeable {\\n *     function initialize() initializer public {\\n *         __ERC20_init(\\\"MyToken\\\", \\\"MTK\\\");\\n *     }\\n * }\\n *\\n * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {\\n *     function initializeV2() reinitializer(2) public {\\n *         __ERC20Permit_init(\\\"MyToken\\\");\\n *     }\\n * }\\n * ```\\n *\\n * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as\\n * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.\\n *\\n * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure\\n * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.\\n *\\n * [CAUTION]\\n * ====\\n * Avoid leaving a contract uninitialized.\\n *\\n * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation\\n * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke\\n * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:\\n *\\n * [.hljs-theme-light.nopadding]\\n * ```\\n * /// @custom:oz-upgrades-unsafe-allow constructor\\n * constructor() {\\n *     _disableInitializers();\\n * }\\n * ```\\n * ====\\n */\\nabstract contract Initializable {\\n    /**\\n     * @dev Indicates that the contract has been initialized.\\n     * @custom:oz-retyped-from bool\\n     */\\n    uint8 private _initialized;\\n\\n    /**\\n     * @dev Indicates that the contract is in the process of being initialized.\\n     */\\n    bool private _initializing;\\n\\n    /**\\n     * @dev Triggered when the contract has been initialized or reinitialized.\\n     */\\n    event Initialized(uint8 version);\\n\\n    /**\\n     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,\\n     * `onlyInitializing` functions can be used to initialize parent contracts.\\n     *\\n     * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a\\n     * constructor.\\n     *\\n     * Emits an {Initialized} event.\\n     */\\n    modifier initializer() {\\n        bool isTopLevelCall = !_initializing;\\n        require(\\n            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),\\n            \\\"Initializable: contract is already initialized\\\"\\n        );\\n        _initialized = 1;\\n        if (isTopLevelCall) {\\n            _initializing = true;\\n        }\\n        _;\\n        if (isTopLevelCall) {\\n            _initializing = false;\\n            emit Initialized(1);\\n        }\\n    }\\n\\n    /**\\n     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the\\n     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be\\n     * used to initialize parent contracts.\\n     *\\n     * A reinitializer may be used after the original initialization step. This is essential to configure modules that\\n     * are added through upgrades and that require initialization.\\n     *\\n     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`\\n     * cannot be nested. If one is invoked in the context of another, execution will revert.\\n     *\\n     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in\\n     * a contract, executing them in the right order is up to the developer or operator.\\n     *\\n     * WARNING: setting the version to 255 will prevent any future reinitialization.\\n     *\\n     * Emits an {Initialized} event.\\n     */\\n    modifier reinitializer(uint8 version) {\\n        require(!_initializing && _initialized < version, \\\"Initializable: contract is already initialized\\\");\\n        _initialized = version;\\n        _initializing = true;\\n        _;\\n        _initializing = false;\\n        emit Initialized(version);\\n    }\\n\\n    /**\\n     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the\\n     * {initializer} and {reinitializer} modifiers, directly or indirectly.\\n     */\\n    modifier onlyInitializing() {\\n        require(_initializing, \\\"Initializable: contract is not initializing\\\");\\n        _;\\n    }\\n\\n    /**\\n     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.\\n     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized\\n     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called\\n     * through proxies.\\n     *\\n     * Emits an {Initialized} event the first time it is successfully executed.\\n     */\\n    function _disableInitializers() internal virtual {\\n        require(!_initializing, \\\"Initializable: contract is initializing\\\");\\n        if (_initialized != type(uint8).max) {\\n            _initialized = type(uint8).max;\\n            emit Initialized(type(uint8).max);\\n        }\\n    }\\n\\n    /**\\n     * @dev Returns the highest version that has been initialized. See {reinitializer}.\\n     */\\n    function _getInitializedVersion() internal view returns (uint8) {\\n        return _initialized;\\n    }\\n\\n    /**\\n     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.\\n     */\\n    function _isInitializing() internal view returns (bool) {\\n        return _initializing;\\n    }\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.9.4) (utils/Context.sol)\\n\\npragma solidity ^0.8.0;\\n\\n/**\\n * @dev Provides information about the current execution context, including the\\n * sender of the transaction and its data. While these are generally available\\n * via msg.sender and msg.data, they should not be accessed in such a direct\\n * manner, since when dealing with meta-transactions the account sending and\\n * paying for execution may not be the actual sender (as far as an application\\n * is concerned).\\n *\\n * This contract is only required for intermediate, library-like contracts.\\n */\\nabstract contract ContextUpgradeable is Initializable {\\n    function __Context_init() internal onlyInitializing {\\n    }\\n\\n    function __Context_init_unchained() internal onlyInitializing {\\n    }\\n    function _msgSender() internal view virtual returns (address) {\\n        return msg.sender;\\n    }\\n\\n    function _msgData() internal view virtual returns (bytes calldata) {\\n        return msg.data;\\n    }\\n\\n    function _contextSuffixLength() internal view virtual returns (uint256) {\\n        return 0;\\n    }\\n\\n    /**\\n     * @dev This empty reserved space is put in place to allow future versions to add new\\n     * variables without shifting down storage in the inheritance chain.\\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\\n     */\\n    uint256[50] private __gap;\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/utils/introspection/IERC165Upgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)\\n\\npragma solidity ^0.8.0;\\n\\n/**\\n * @dev Interface of the ERC165 standard, as defined in the\\n * https://eips.ethereum.org/EIPS/eip-165[EIP].\\n *\\n * Implementers can declare support of contract interfaces, which can then be\\n * queried by others ({ERC165Checker}).\\n *\\n * For an implementation, see {ERC165}.\\n */\\ninterface IERC165Upgradeable {\\n    /**\\n     * @dev Returns true if this contract implements the interface defined by\\n     * `interfaceId`. See the corresponding\\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]\\n     * to learn more about how these ids are created.\\n     *\\n     * This function call must use less than 30 000 gas.\\n     */\\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/utils/introspection/ERC165Upgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)\\n\\npragma solidity ^0.8.0;\\n\\n\\n/**\\n * @dev Implementation of the {IERC165} interface.\\n *\\n * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check\\n * for the additional interface id that will be supported. For example:\\n *\\n * ```solidity\\n * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\\n *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);\\n * }\\n * ```\\n *\\n * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.\\n */\\nabstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {\\n    function __ERC165_init() internal onlyInitializing {\\n    }\\n\\n    function __ERC165_init_unchained() internal onlyInitializing {\\n    }\\n    /**\\n     * @dev See {IERC165-supportsInterface}.\\n     */\\n    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\\n        return interfaceId == type(IERC165Upgradeable).interfaceId;\\n    }\\n\\n    /**\\n     * @dev This empty reserved space is put in place to allow future versions to add new\\n     * variables without shifting down storage in the inheritance chain.\\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\\n     */\\n    uint256[50] private __gap;\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/utils/math/MathUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)\\n\\npragma solidity ^0.8.0;\\n\\n/**\\n * @dev Standard math utilities missing in the Solidity language.\\n */\\nlibrary MathUpgradeable {\\n    enum Rounding {\\n        Down, // Toward negative infinity\\n        Up, // Toward infinity\\n        Zero // Toward zero\\n    }\\n\\n    /**\\n     * @dev Returns the largest of two numbers.\\n     */\\n    function max(uint256 a, uint256 b) internal pure returns (uint256) {\\n        return a > b ? a : b;\\n    }\\n\\n    /**\\n     * @dev Returns the smallest of two numbers.\\n     */\\n    function min(uint256 a, uint256 b) internal pure returns (uint256) {\\n        return a < b ? a : b;\\n    }\\n\\n    /**\\n     * @dev Returns the average of two numbers. The result is rounded towards\\n     * zero.\\n     */\\n    function average(uint256 a, uint256 b) internal pure returns (uint256) {\\n        // (a + b) / 2 can overflow.\\n        return (a & b) + (a ^ b) / 2;\\n    }\\n\\n    /**\\n     * @dev Returns the ceiling of the division of two numbers.\\n     *\\n     * This differs from standard division with `/` in that it rounds up instead\\n     * of rounding down.\\n     */\\n    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {\\n        // (a + b - 1) / b can overflow on addition, so we distribute.\\n        return a == 0 ? 0 : (a - 1) / b + 1;\\n    }\\n\\n    /**\\n     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0\\n     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)\\n     * with further edits by Uniswap Labs also under MIT license.\\n     */\\n    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {\\n        unchecked {\\n            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use\\n            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256\\n            // variables such that product = prod1 * 2^256 + prod0.\\n            uint256 prod0; // Least significant 256 bits of the product\\n            uint256 prod1; // Most significant 256 bits of the product\\n            assembly {\\n                let mm := mulmod(x, y, not(0))\\n                prod0 := mul(x, y)\\n                prod1 := sub(sub(mm, prod0), lt(mm, prod0))\\n            }\\n\\n            // Handle non-overflow cases, 256 by 256 division.\\n            if (prod1 == 0) {\\n                // Solidity will revert if denominator == 0, unlike the div opcode on its own.\\n                // The surrounding unchecked block does not change this fact.\\n                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.\\n                return prod0 / denominator;\\n            }\\n\\n            // Make sure the result is less than 2^256. Also prevents denominator == 0.\\n            require(denominator > prod1, \\\"Math: mulDiv overflow\\\");\\n\\n            ///////////////////////////////////////////////\\n            // 512 by 256 division.\\n            ///////////////////////////////////////////////\\n\\n            // Make division exact by subtracting the remainder from [prod1 prod0].\\n            uint256 remainder;\\n            assembly {\\n                // Compute remainder using mulmod.\\n                remainder := mulmod(x, y, denominator)\\n\\n                // Subtract 256 bit number from 512 bit number.\\n                prod1 := sub(prod1, gt(remainder, prod0))\\n                prod0 := sub(prod0, remainder)\\n            }\\n\\n            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.\\n            // See https://cs.stackexchange.com/q/138556/92363.\\n\\n            // Does not overflow because the denominator cannot be zero at this stage in the function.\\n            uint256 twos = denominator & (~denominator + 1);\\n            assembly {\\n                // Divide denominator by twos.\\n                denominator := div(denominator, twos)\\n\\n                // Divide [prod1 prod0] by twos.\\n                prod0 := div(prod0, twos)\\n\\n                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.\\n                twos := add(div(sub(0, twos), twos), 1)\\n            }\\n\\n            // Shift in bits from prod1 into prod0.\\n            prod0 |= prod1 * twos;\\n\\n            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such\\n            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for\\n            // four bits. That is, denominator * inv = 1 mod 2^4.\\n            uint256 inverse = (3 * denominator) ^ 2;\\n\\n            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works\\n            // in modular arithmetic, doubling the correct bits in each step.\\n            inverse *= 2 - denominator * inverse; // inverse mod 2^8\\n            inverse *= 2 - denominator * inverse; // inverse mod 2^16\\n            inverse *= 2 - denominator * inverse; // inverse mod 2^32\\n            inverse *= 2 - denominator * inverse; // inverse mod 2^64\\n            inverse *= 2 - denominator * inverse; // inverse mod 2^128\\n            inverse *= 2 - denominator * inverse; // inverse mod 2^256\\n\\n            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.\\n            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is\\n            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1\\n            // is no longer required.\\n            result = prod0 * inverse;\\n            return result;\\n        }\\n    }\\n\\n    /**\\n     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.\\n     */\\n    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {\\n        uint256 result = mulDiv(x, y, denominator);\\n        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {\\n            result += 1;\\n        }\\n        return result;\\n    }\\n\\n    /**\\n     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.\\n     *\\n     * Inspired by Henry S. Warren, Jr.'s \\\"Hacker's Delight\\\" (Chapter 11).\\n     */\\n    function sqrt(uint256 a) internal pure returns (uint256) {\\n        if (a == 0) {\\n            return 0;\\n        }\\n\\n        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.\\n        //\\n        // We know that the \\\"msb\\\" (most significant bit) of our target number `a` is a power of 2 such that we have\\n        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.\\n        //\\n        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`\\n        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`\\n        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`\\n        //\\n        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.\\n        uint256 result = 1 << (log2(a) >> 1);\\n\\n        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,\\n        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at\\n        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision\\n        // into the expected uint128 result.\\n        unchecked {\\n            result = (result + a / result) >> 1;\\n            result = (result + a / result) >> 1;\\n            result = (result + a / result) >> 1;\\n            result = (result + a / result) >> 1;\\n            result = (result + a / result) >> 1;\\n            result = (result + a / result) >> 1;\\n            result = (result + a / result) >> 1;\\n            return min(result, a / result);\\n        }\\n    }\\n\\n    /**\\n     * @notice Calculates sqrt(a), following the selected rounding direction.\\n     */\\n    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {\\n        unchecked {\\n            uint256 result = sqrt(a);\\n            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);\\n        }\\n    }\\n\\n    /**\\n     * @dev Return the log in base 2, rounded down, of a positive value.\\n     * Returns 0 if given 0.\\n     */\\n    function log2(uint256 value) internal pure returns (uint256) {\\n        uint256 result = 0;\\n        unchecked {\\n            if (value >> 128 > 0) {\\n                value >>= 128;\\n                result += 128;\\n            }\\n            if (value >> 64 > 0) {\\n                value >>= 64;\\n                result += 64;\\n            }\\n            if (value >> 32 > 0) {\\n                value >>= 32;\\n                result += 32;\\n            }\\n            if (value >> 16 > 0) {\\n                value >>= 16;\\n                result += 16;\\n            }\\n            if (value >> 8 > 0) {\\n                value >>= 8;\\n                result += 8;\\n            }\\n            if (value >> 4 > 0) {\\n                value >>= 4;\\n                result += 4;\\n            }\\n            if (value >> 2 > 0) {\\n                value >>= 2;\\n                result += 2;\\n            }\\n            if (value >> 1 > 0) {\\n                result += 1;\\n            }\\n        }\\n        return result;\\n    }\\n\\n    /**\\n     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.\\n     * Returns 0 if given 0.\\n     */\\n    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {\\n        unchecked {\\n            uint256 result = log2(value);\\n            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);\\n        }\\n    }\\n\\n    /**\\n     * @dev Return the log in base 10, rounded down, of a positive value.\\n     * Returns 0 if given 0.\\n     */\\n    function log10(uint256 value) internal pure returns (uint256) {\\n        uint256 result = 0;\\n        unchecked {\\n            if (value >= 10 ** 64) {\\n                value /= 10 ** 64;\\n                result += 64;\\n            }\\n            if (value >= 10 ** 32) {\\n                value /= 10 ** 32;\\n                result += 32;\\n            }\\n            if (value >= 10 ** 16) {\\n                value /= 10 ** 16;\\n                result += 16;\\n            }\\n            if (value >= 10 ** 8) {\\n                value /= 10 ** 8;\\n                result += 8;\\n            }\\n            if (value >= 10 ** 4) {\\n                value /= 10 ** 4;\\n                result += 4;\\n            }\\n            if (value >= 10 ** 2) {\\n                value /= 10 ** 2;\\n                result += 2;\\n            }\\n            if (value >= 10 ** 1) {\\n                result += 1;\\n            }\\n        }\\n        return result;\\n    }\\n\\n    /**\\n     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.\\n     * Returns 0 if given 0.\\n     */\\n    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {\\n        unchecked {\\n            uint256 result = log10(value);\\n            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);\\n        }\\n    }\\n\\n    /**\\n     * @dev Return the log in base 256, rounded down, of a positive value.\\n     * Returns 0 if given 0.\\n     *\\n     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.\\n     */\\n    function log256(uint256 value) internal pure returns (uint256) {\\n        uint256 result = 0;\\n        unchecked {\\n            if (value >> 128 > 0) {\\n                value >>= 128;\\n                result += 16;\\n            }\\n            if (value >> 64 > 0) {\\n                value >>= 64;\\n                result += 8;\\n            }\\n            if (value >> 32 > 0) {\\n                value >>= 32;\\n                result += 4;\\n            }\\n            if (value >> 16 > 0) {\\n                value >>= 16;\\n                result += 2;\\n            }\\n            if (value >> 8 > 0) {\\n                result += 1;\\n            }\\n        }\\n        return result;\\n    }\\n\\n    /**\\n     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.\\n     * Returns 0 if given 0.\\n     */\\n    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {\\n        unchecked {\\n            uint256 result = log256(value);\\n            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);\\n        }\\n    }\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/utils/math/SignedMathUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)\\n\\npragma solidity ^0.8.0;\\n\\n/**\\n * @dev Standard signed math utilities missing in the Solidity language.\\n */\\nlibrary SignedMathUpgradeable {\\n    /**\\n     * @dev Returns the largest of two signed numbers.\\n     */\\n    function max(int256 a, int256 b) internal pure returns (int256) {\\n        return a > b ? a : b;\\n    }\\n\\n    /**\\n     * @dev Returns the smallest of two signed numbers.\\n     */\\n    function min(int256 a, int256 b) internal pure returns (int256) {\\n        return a < b ? a : b;\\n    }\\n\\n    /**\\n     * @dev Returns the average of two signed numbers without overflow.\\n     * The result is rounded towards zero.\\n     */\\n    function average(int256 a, int256 b) internal pure returns (int256) {\\n        // Formula from the book \\\"Hacker's Delight\\\"\\n        int256 x = (a & b) + ((a ^ b) >> 1);\\n        return x + (int256(uint256(x) >> 255) & (a ^ b));\\n    }\\n\\n    /**\\n     * @dev Returns the absolute unsigned value of a signed value.\\n     */\\n    function abs(int256 n) internal pure returns (uint256) {\\n        unchecked {\\n            // must be unchecked in order to support `n = type(int256).min`\\n            return uint256(n >= 0 ? n : -n);\\n        }\\n    }\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/utils/StringsUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)\\n\\npragma solidity ^0.8.0;\\n\\n\\n/**\\n * @dev String operations.\\n */\\nlibrary StringsUpgradeable {\\n    bytes16 private constant _SYMBOLS = \\\"0123456789abcdef\\\";\\n    uint8 private constant _ADDRESS_LENGTH = 20;\\n\\n    /**\\n     * @dev Converts a `uint256` to its ASCII `string` decimal representation.\\n     */\\n    function toString(uint256 value) internal pure returns (string memory) {\\n        unchecked {\\n            uint256 length = MathUpgradeable.log10(value) + 1;\\n            string memory buffer = new string(length);\\n            uint256 ptr;\\n            /// @solidity memory-safe-assembly\\n            assembly {\\n                ptr := add(buffer, add(32, length))\\n            }\\n            while (true) {\\n                ptr--;\\n                /// @solidity memory-safe-assembly\\n                assembly {\\n                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))\\n                }\\n                value /= 10;\\n                if (value == 0) break;\\n            }\\n            return buffer;\\n        }\\n    }\\n\\n    /**\\n     * @dev Converts a `int256` to its ASCII `string` decimal representation.\\n     */\\n    function toString(int256 value) internal pure returns (string memory) {\\n        return string(abi.encodePacked(value < 0 ? \\\"-\\\" : \\\"\\\", toString(SignedMathUpgradeable.abs(value))));\\n    }\\n\\n    /**\\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.\\n     */\\n    function toHexString(uint256 value) internal pure returns (string memory) {\\n        unchecked {\\n            return toHexString(value, MathUpgradeable.log256(value) + 1);\\n        }\\n    }\\n\\n    /**\\n     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.\\n     */\\n    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {\\n        bytes memory buffer = new bytes(2 * length + 2);\\n        buffer[0] = \\\"0\\\";\\n        buffer[1] = \\\"x\\\";\\n        for (uint256 i = 2 * length + 1; i > 1; --i) {\\n            buffer[i] = _SYMBOLS[value & 0xf];\\n            value >>= 4;\\n        }\\n        require(value == 0, \\\"Strings: hex length insufficient\\\");\\n        return string(buffer);\\n    }\\n\\n    /**\\n     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.\\n     */\\n    function toHexString(address addr) internal pure returns (string memory) {\\n        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);\\n    }\\n\\n    /**\\n     * @dev Returns true if the two strings are equal.\\n     */\\n    function equal(string memory a, string memory b) internal pure returns (bool) {\\n        return keccak256(bytes(a)) == keccak256(bytes(b));\\n    }\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/access/AccessControlUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.9.0) (access/AccessControl.sol)\\n\\npragma solidity ^0.8.0;\\n\\n\\n\\n\\n\\n/**\\n * @dev Contract module that allows children to implement role-based access\\n * control mechanisms. This is a lightweight version that doesn't allow enumerating role\\n * members except through off-chain means by accessing the contract event logs. Some\\n * applications may benefit from on-chain enumerability, for those cases see\\n * {AccessControlEnumerable}.\\n *\\n * Roles are referred to by their `bytes32` identifier. These should be exposed\\n * in the external API and be unique. The best way to achieve this is by\\n * using `public constant` hash digests:\\n *\\n * ```solidity\\n * bytes32 public constant MY_ROLE = keccak256(\\\"MY_ROLE\\\");\\n * ```\\n *\\n * Roles can be used to represent a set of permissions. To restrict access to a\\n * function call, use {hasRole}:\\n *\\n * ```solidity\\n * function foo() public {\\n *     require(hasRole(MY_ROLE, msg.sender));\\n *     ...\\n * }\\n * ```\\n *\\n * Roles can be granted and revoked dynamically via the {grantRole} and\\n * {revokeRole} functions. Each role has an associated admin role, and only\\n * accounts that have a role's admin role can call {grantRole} and {revokeRole}.\\n *\\n * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means\\n * that only accounts with this role will be able to grant or revoke other\\n * roles. More complex role relationships can be created by using\\n * {_setRoleAdmin}.\\n *\\n * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to\\n * grant and revoke this role. Extra precautions should be taken to secure\\n * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}\\n * to enforce additional security measures for this role.\\n */\\nabstract contract AccessControlUpgradeable is Initializable, ContextUpgradeable, IAccessControlUpgradeable, ERC165Upgradeable {\\n    struct RoleData {\\n        mapping(address => bool) members;\\n        bytes32 adminRole;\\n    }\\n\\n    mapping(bytes32 => RoleData) private _roles;\\n\\n    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;\\n\\n    /**\\n     * @dev Modifier that checks that an account has a specific role. Reverts\\n     * with a standardized message including the required role.\\n     *\\n     * The format of the revert reason is given by the following regular expression:\\n     *\\n     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/\\n     *\\n     * _Available since v4.1._\\n     */\\n    modifier onlyRole(bytes32 role) {\\n        _checkRole(role);\\n        _;\\n    }\\n\\n    function __AccessControl_init() internal onlyInitializing {\\n    }\\n\\n    function __AccessControl_init_unchained() internal onlyInitializing {\\n    }\\n    /**\\n     * @dev See {IERC165-supportsInterface}.\\n     */\\n    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\\n        return interfaceId == type(IAccessControlUpgradeable).interfaceId || super.supportsInterface(interfaceId);\\n    }\\n\\n    /**\\n     * @dev Returns `true` if `account` has been granted `role`.\\n     */\\n    function hasRole(bytes32 role, address account) public view virtual override returns (bool) {\\n        return _roles[role].members[account];\\n    }\\n\\n    /**\\n     * @dev Revert with a standard message if `_msgSender()` is missing `role`.\\n     * Overriding this function changes the behavior of the {onlyRole} modifier.\\n     *\\n     * Format of the revert message is described in {_checkRole}.\\n     *\\n     * _Available since v4.6._\\n     */\\n    function _checkRole(bytes32 role) internal view virtual {\\n        _checkRole(role, _msgSender());\\n    }\\n\\n    /**\\n     * @dev Revert with a standard message if `account` is missing `role`.\\n     *\\n     * The format of the revert reason is given by the following regular expression:\\n     *\\n     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/\\n     */\\n    function _checkRole(bytes32 role, address account) internal view virtual {\\n        if (!hasRole(role, account)) {\\n            revert(\\n                string(\\n                    abi.encodePacked(\\n                        \\\"AccessControl: account \\\",\\n                        StringsUpgradeable.toHexString(account),\\n                        \\\" is missing role \\\",\\n                        StringsUpgradeable.toHexString(uint256(role), 32)\\n                    )\\n                )\\n            );\\n        }\\n    }\\n\\n    /**\\n     * @dev Returns the admin role that controls `role`. See {grantRole} and\\n     * {revokeRole}.\\n     *\\n     * To change a role's admin, use {_setRoleAdmin}.\\n     */\\n    function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {\\n        return _roles[role].adminRole;\\n    }\\n\\n    /**\\n     * @dev Grants `role` to `account`.\\n     *\\n     * If `account` had not been already granted `role`, emits a {RoleGranted}\\n     * event.\\n     *\\n     * Requirements:\\n     *\\n     * - the caller must have ``role``'s admin role.\\n     *\\n     * May emit a {RoleGranted} event.\\n     */\\n    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {\\n        _grantRole(role, account);\\n    }\\n\\n    /**\\n     * @dev Revokes `role` from `account`.\\n     *\\n     * If `account` had been granted `role`, emits a {RoleRevoked} event.\\n     *\\n     * Requirements:\\n     *\\n     * - the caller must have ``role``'s admin role.\\n     *\\n     * May emit a {RoleRevoked} event.\\n     */\\n    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {\\n        _revokeRole(role, account);\\n    }\\n\\n    /**\\n     * @dev Revokes `role` from the calling account.\\n     *\\n     * Roles are often managed via {grantRole} and {revokeRole}: this function's\\n     * purpose is to provide a mechanism for accounts to lose their privileges\\n     * if they are compromised (such as when a trusted device is misplaced).\\n     *\\n     * If the calling account had been revoked `role`, emits a {RoleRevoked}\\n     * event.\\n     *\\n     * Requirements:\\n     *\\n     * - the caller must be `account`.\\n     *\\n     * May emit a {RoleRevoked} event.\\n     */\\n    function renounceRole(bytes32 role, address account) public virtual override {\\n        require(account == _msgSender(), \\\"AccessControl: can only renounce roles for self\\\");\\n\\n        _revokeRole(role, account);\\n    }\\n\\n    /**\\n     * @dev Grants `role` to `account`.\\n     *\\n     * If `account` had not been already granted `role`, emits a {RoleGranted}\\n     * event. Note that unlike {grantRole}, this function doesn't perform any\\n     * checks on the calling account.\\n     *\\n     * May emit a {RoleGranted} event.\\n     *\\n     * [WARNING]\\n     * ====\\n     * This function should only be called from the constructor when setting\\n     * up the initial roles for the system.\\n     *\\n     * Using this function in any other way is effectively circumventing the admin\\n     * system imposed by {AccessControl}.\\n     * ====\\n     *\\n     * NOTE: This function is deprecated in favor of {_grantRole}.\\n     */\\n    function _setupRole(bytes32 role, address account) internal virtual {\\n        _grantRole(role, account);\\n    }\\n\\n    /**\\n     * @dev Sets `adminRole` as ``role``'s admin role.\\n     *\\n     * Emits a {RoleAdminChanged} event.\\n     */\\n    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {\\n        bytes32 previousAdminRole = getRoleAdmin(role);\\n        _roles[role].adminRole = adminRole;\\n        emit RoleAdminChanged(role, previousAdminRole, adminRole);\\n    }\\n\\n    /**\\n     * @dev Grants `role` to `account`.\\n     *\\n     * Internal function without access restriction.\\n     *\\n     * May emit a {RoleGranted} event.\\n     */\\n    function _grantRole(bytes32 role, address account) internal virtual {\\n        if (!hasRole(role, account)) {\\n            _roles[role].members[account] = true;\\n            emit RoleGranted(role, account, _msgSender());\\n        }\\n    }\\n\\n    /**\\n     * @dev Revokes `role` from `account`.\\n     *\\n     * Internal function without access restriction.\\n     *\\n     * May emit a {RoleRevoked} event.\\n     */\\n    function _revokeRole(bytes32 role, address account) internal virtual {\\n        if (hasRole(role, account)) {\\n            _roles[role].members[account] = false;\\n            emit RoleRevoked(role, account, _msgSender());\\n        }\\n    }\\n\\n    /**\\n     * @dev This empty reserved space is put in place to allow future versions to add new\\n     * variables without shifting down storage in the inheritance chain.\\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\\n     */\\n    uint256[49] private __gap;\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/access/IAccessControlEnumerableUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts v4.4.1 (access/IAccessControlEnumerable.sol)\\n\\npragma solidity ^0.8.0;\\n\\n/**\\n * @dev External interface of AccessControlEnumerable declared to support ERC165 detection.\\n */\\ninterface IAccessControlEnumerableUpgradeable is IAccessControlUpgradeable {\\n    /**\\n     * @dev Returns one of the accounts that have `role`. `index` must be a\\n     * value between 0 and {getRoleMemberCount}, non-inclusive.\\n     *\\n     * Role bearers are not sorted in any particular way, and their ordering may\\n     * change at any point.\\n     *\\n     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure\\n     * you perform all queries on the same block. See the following\\n     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]\\n     * for more information.\\n     */\\n    function getRoleMember(bytes32 role, uint256 index) external view returns (address);\\n\\n    /**\\n     * @dev Returns the number of accounts that have `role`. Can be used\\n     * together with {getRoleMember} to enumerate all bearers of a role.\\n     */\\n    function getRoleMemberCount(bytes32 role) external view returns (uint256);\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/utils/structs/EnumerableSetUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/structs/EnumerableSet.sol)\\n// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.\\n\\npragma solidity ^0.8.0;\\n\\n/**\\n * @dev Library for managing\\n * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive\\n * types.\\n *\\n * Sets have the following properties:\\n *\\n * - Elements are added, removed, and checked for existence in constant time\\n * (O(1)).\\n * - Elements are enumerated in O(n). No guarantees are made on the ordering.\\n *\\n * ```solidity\\n * contract Example {\\n *     // Add the library methods\\n *     using EnumerableSet for EnumerableSet.AddressSet;\\n *\\n *     // Declare a set state variable\\n *     EnumerableSet.AddressSet private mySet;\\n * }\\n * ```\\n *\\n * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)\\n * and `uint256` (`UintSet`) are supported.\\n *\\n * [WARNING]\\n * ====\\n * Trying to delete such a structure from storage will likely result in data corruption, rendering the structure\\n * unusable.\\n * See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.\\n *\\n * In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an\\n * array of EnumerableSet.\\n * ====\\n */\\nlibrary EnumerableSetUpgradeable {\\n    // To implement this library for multiple types with as little code\\n    // repetition as possible, we write it in terms of a generic Set type with\\n    // bytes32 values.\\n    // The Set implementation uses private functions, and user-facing\\n    // implementations (such as AddressSet) are just wrappers around the\\n    // underlying Set.\\n    // This means that we can only create new EnumerableSets for types that fit\\n    // in bytes32.\\n\\n    struct Set {\\n        // Storage of set values\\n        bytes32[] _values;\\n        // Position of the value in the `values` array, plus 1 because index 0\\n        // means a value is not in the set.\\n        mapping(bytes32 => uint256) _indexes;\\n    }\\n\\n    /**\\n     * @dev Add a value to a set. O(1).\\n     *\\n     * Returns true if the value was added to the set, that is if it was not\\n     * already present.\\n     */\\n    function _add(Set storage set, bytes32 value) private returns (bool) {\\n        if (!_contains(set, value)) {\\n            set._values.push(value);\\n            // The value is stored at length-1, but we add 1 to all indexes\\n            // and use 0 as a sentinel value\\n            set._indexes[value] = set._values.length;\\n            return true;\\n        } else {\\n            return false;\\n        }\\n    }\\n\\n    /**\\n     * @dev Removes a value from a set. O(1).\\n     *\\n     * Returns true if the value was removed from the set, that is if it was\\n     * present.\\n     */\\n    function _remove(Set storage set, bytes32 value) private returns (bool) {\\n        // We read and store the value's index to prevent multiple reads from the same storage slot\\n        uint256 valueIndex = set._indexes[value];\\n\\n        if (valueIndex != 0) {\\n            // Equivalent to contains(set, value)\\n            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in\\n            // the array, and then remove the last element (sometimes called as 'swap and pop').\\n            // This modifies the order of the array, as noted in {at}.\\n\\n            uint256 toDeleteIndex = valueIndex - 1;\\n            uint256 lastIndex = set._values.length - 1;\\n\\n            if (lastIndex != toDeleteIndex) {\\n                bytes32 lastValue = set._values[lastIndex];\\n\\n                // Move the last value to the index where the value to delete is\\n                set._values[toDeleteIndex] = lastValue;\\n                // Update the index for the moved value\\n                set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex\\n            }\\n\\n            // Delete the slot where the moved value was stored\\n            set._values.pop();\\n\\n            // Delete the index for the deleted slot\\n            delete set._indexes[value];\\n\\n            return true;\\n        } else {\\n            return false;\\n        }\\n    }\\n\\n    /**\\n     * @dev Returns true if the value is in the set. O(1).\\n     */\\n    function _contains(Set storage set, bytes32 value) private view returns (bool) {\\n        return set._indexes[value] != 0;\\n    }\\n\\n    /**\\n     * @dev Returns the number of values on the set. O(1).\\n     */\\n    function _length(Set storage set) private view returns (uint256) {\\n        return set._values.length;\\n    }\\n\\n    /**\\n     * @dev Returns the value stored at position `index` in the set. O(1).\\n     *\\n     * Note that there are no guarantees on the ordering of values inside the\\n     * array, and it may change when more values are added or removed.\\n     *\\n     * Requirements:\\n     *\\n     * - `index` must be strictly less than {length}.\\n     */\\n    function _at(Set storage set, uint256 index) private view returns (bytes32) {\\n        return set._values[index];\\n    }\\n\\n    /**\\n     * @dev Return the entire set in an array\\n     *\\n     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed\\n     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that\\n     * this function has an unbounded cost, and using it as part of a state-changing function may render the function\\n     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.\\n     */\\n    function _values(Set storage set) private view returns (bytes32[] memory) {\\n        return set._values;\\n    }\\n\\n    // Bytes32Set\\n\\n    struct Bytes32Set {\\n        Set _inner;\\n    }\\n\\n    /**\\n     * @dev Add a value to a set. O(1).\\n     *\\n     * Returns true if the value was added to the set, that is if it was not\\n     * already present.\\n     */\\n    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {\\n        return _add(set._inner, value);\\n    }\\n\\n    /**\\n     * @dev Removes a value from a set. O(1).\\n     *\\n     * Returns true if the value was removed from the set, that is if it was\\n     * present.\\n     */\\n    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {\\n        return _remove(set._inner, value);\\n    }\\n\\n    /**\\n     * @dev Returns true if the value is in the set. O(1).\\n     */\\n    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {\\n        return _contains(set._inner, value);\\n    }\\n\\n    /**\\n     * @dev Returns the number of values in the set. O(1).\\n     */\\n    function length(Bytes32Set storage set) internal view returns (uint256) {\\n        return _length(set._inner);\\n    }\\n\\n    /**\\n     * @dev Returns the value stored at position `index` in the set. O(1).\\n     *\\n     * Note that there are no guarantees on the ordering of values inside the\\n     * array, and it may change when more values are added or removed.\\n     *\\n     * Requirements:\\n     *\\n     * - `index` must be strictly less than {length}.\\n     */\\n    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {\\n        return _at(set._inner, index);\\n    }\\n\\n    /**\\n     * @dev Return the entire set in an array\\n     *\\n     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed\\n     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that\\n     * this function has an unbounded cost, and using it as part of a state-changing function may render the function\\n     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.\\n     */\\n    function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {\\n        bytes32[] memory store = _values(set._inner);\\n        bytes32[] memory result;\\n\\n        /// @solidity memory-safe-assembly\\n        assembly {\\n            result := store\\n        }\\n\\n        return result;\\n    }\\n\\n    // AddressSet\\n\\n    struct AddressSet {\\n        Set _inner;\\n    }\\n\\n    /**\\n     * @dev Add a value to a set. O(1).\\n     *\\n     * Returns true if the value was added to the set, that is if it was not\\n     * already present.\\n     */\\n    function add(AddressSet storage set, address value) internal returns (bool) {\\n        return _add(set._inner, bytes32(uint256(uint160(value))));\\n    }\\n\\n    /**\\n     * @dev Removes a value from a set. O(1).\\n     *\\n     * Returns true if the value was removed from the set, that is if it was\\n     * present.\\n     */\\n    function remove(AddressSet storage set, address value) internal returns (bool) {\\n        return _remove(set._inner, bytes32(uint256(uint160(value))));\\n    }\\n\\n    /**\\n     * @dev Returns true if the value is in the set. O(1).\\n     */\\n    function contains(AddressSet storage set, address value) internal view returns (bool) {\\n        return _contains(set._inner, bytes32(uint256(uint160(value))));\\n    }\\n\\n    /**\\n     * @dev Returns the number of values in the set. O(1).\\n     */\\n    function length(AddressSet storage set) internal view returns (uint256) {\\n        return _length(set._inner);\\n    }\\n\\n    /**\\n     * @dev Returns the value stored at position `index` in the set. O(1).\\n     *\\n     * Note that there are no guarantees on the ordering of values inside the\\n     * array, and it may change when more values are added or removed.\\n     *\\n     * Requirements:\\n     *\\n     * - `index` must be strictly less than {length}.\\n     */\\n    function at(AddressSet storage set, uint256 index) internal view returns (address) {\\n        return address(uint160(uint256(_at(set._inner, index))));\\n    }\\n\\n    /**\\n     * @dev Return the entire set in an array\\n     *\\n     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed\\n     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that\\n     * this function has an unbounded cost, and using it as part of a state-changing function may render the function\\n     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.\\n     */\\n    function values(AddressSet storage set) internal view returns (address[] memory) {\\n        bytes32[] memory store = _values(set._inner);\\n        address[] memory result;\\n\\n        /// @solidity memory-safe-assembly\\n        assembly {\\n            result := store\\n        }\\n\\n        return result;\\n    }\\n\\n    // UintSet\\n\\n    struct UintSet {\\n        Set _inner;\\n    }\\n\\n    /**\\n     * @dev Add a value to a set. O(1).\\n     *\\n     * Returns true if the value was added to the set, that is if it was not\\n     * already present.\\n     */\\n    function add(UintSet storage set, uint256 value) internal returns (bool) {\\n        return _add(set._inner, bytes32(value));\\n    }\\n\\n    /**\\n     * @dev Removes a value from a set. O(1).\\n     *\\n     * Returns true if the value was removed from the set, that is if it was\\n     * present.\\n     */\\n    function remove(UintSet storage set, uint256 value) internal returns (bool) {\\n        return _remove(set._inner, bytes32(value));\\n    }\\n\\n    /**\\n     * @dev Returns true if the value is in the set. O(1).\\n     */\\n    function contains(UintSet storage set, uint256 value) internal view returns (bool) {\\n        return _contains(set._inner, bytes32(value));\\n    }\\n\\n    /**\\n     * @dev Returns the number of values in the set. O(1).\\n     */\\n    function length(UintSet storage set) internal view returns (uint256) {\\n        return _length(set._inner);\\n    }\\n\\n    /**\\n     * @dev Returns the value stored at position `index` in the set. O(1).\\n     *\\n     * Note that there are no guarantees on the ordering of values inside the\\n     * array, and it may change when more values are added or removed.\\n     *\\n     * Requirements:\\n     *\\n     * - `index` must be strictly less than {length}.\\n     */\\n    function at(UintSet storage set, uint256 index) internal view returns (uint256) {\\n        return uint256(_at(set._inner, index));\\n    }\\n\\n    /**\\n     * @dev Return the entire set in an array\\n     *\\n     * WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed\\n     * to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that\\n     * this function has an unbounded cost, and using it as part of a state-changing function may render the function\\n     * uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.\\n     */\\n    function values(UintSet storage set) internal view returns (uint256[] memory) {\\n        bytes32[] memory store = _values(set._inner);\\n        uint256[] memory result;\\n\\n        /// @solidity memory-safe-assembly\\n        assembly {\\n            result := store\\n        }\\n\\n        return result;\\n    }\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/access/AccessControlEnumerableUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.5.0) (access/AccessControlEnumerable.sol)\\n\\npragma solidity ^0.8.0;\\n\\n\\n\\n\\n/**\\n * @dev Extension of {AccessControl} that allows enumerating the members of each role.\\n */\\nabstract contract AccessControlEnumerableUpgradeable is Initializable, IAccessControlEnumerableUpgradeable, AccessControlUpgradeable {\\n    using EnumerableSetUpgradeable for EnumerableSetUpgradeable.AddressSet;\\n\\n    mapping(bytes32 => EnumerableSetUpgradeable.AddressSet) private _roleMembers;\\n\\n    function __AccessControlEnumerable_init() internal onlyInitializing {\\n    }\\n\\n    function __AccessControlEnumerable_init_unchained() internal onlyInitializing {\\n    }\\n    /**\\n     * @dev See {IERC165-supportsInterface}.\\n     */\\n    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {\\n        return interfaceId == type(IAccessControlEnumerableUpgradeable).interfaceId || super.supportsInterface(interfaceId);\\n    }\\n\\n    /**\\n     * @dev Returns one of the accounts that have `role`. `index` must be a\\n     * value between 0 and {getRoleMemberCount}, non-inclusive.\\n     *\\n     * Role bearers are not sorted in any particular way, and their ordering may\\n     * change at any point.\\n     *\\n     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure\\n     * you perform all queries on the same block. See the following\\n     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]\\n     * for more information.\\n     */\\n    function getRoleMember(bytes32 role, uint256 index) public view virtual override returns (address) {\\n        return _roleMembers[role].at(index);\\n    }\\n\\n    /**\\n     * @dev Returns the number of accounts that have `role`. Can be used\\n     * together with {getRoleMember} to enumerate all bearers of a role.\\n     */\\n    function getRoleMemberCount(bytes32 role) public view virtual override returns (uint256) {\\n        return _roleMembers[role].length();\\n    }\\n\\n    /**\\n     * @dev Overload {_grantRole} to track enumerable memberships\\n     */\\n    function _grantRole(bytes32 role, address account) internal virtual override {\\n        super._grantRole(role, account);\\n        _roleMembers[role].add(account);\\n    }\\n\\n    /**\\n     * @dev Overload {_revokeRole} to track enumerable memberships\\n     */\\n    function _revokeRole(bytes32 role, address account) internal virtual override {\\n        super._revokeRole(role, account);\\n        _roleMembers[role].remove(account);\\n    }\\n\\n    /**\\n     * @dev This empty reserved space is put in place to allow future versions to add new\\n     * variables without shifting down storage in the inheritance chain.\\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\\n     */\\n    uint256[49] private __gap;\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)\\n\\npragma solidity ^0.8.0;\\n\\n\\n/**\\n * @dev Contract module which provides a basic access control mechanism, where\\n * there is an account (an owner) that can be granted exclusive access to\\n * specific functions.\\n *\\n * By default, the owner account will be the one that deploys the contract. This\\n * can later be changed with {transferOwnership}.\\n *\\n * This module is used through inheritance. It will make available the modifier\\n * `onlyOwner`, which can be applied to your functions to restrict their use to\\n * the owner.\\n */\\nabstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {\\n    address private _owner;\\n\\n    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);\\n\\n    /**\\n     * @dev Initializes the contract setting the deployer as the initial owner.\\n     */\\n    function __Ownable_init() internal onlyInitializing {\\n        __Ownable_init_unchained();\\n    }\\n\\n    function __Ownable_init_unchained() internal onlyInitializing {\\n        _transferOwnership(_msgSender());\\n    }\\n\\n    /**\\n     * @dev Throws if called by any account other than the owner.\\n     */\\n    modifier onlyOwner() {\\n        _checkOwner();\\n        _;\\n    }\\n\\n    /**\\n     * @dev Returns the address of the current owner.\\n     */\\n    function owner() public view virtual returns (address) {\\n        return _owner;\\n    }\\n\\n    /**\\n     * @dev Throws if the sender is not the owner.\\n     */\\n    function _checkOwner() internal view virtual {\\n        require(owner() == _msgSender(), \\\"Ownable: caller is not the owner\\\");\\n    }\\n\\n    /**\\n     * @dev Leaves the contract without owner. It will not be possible to call\\n     * `onlyOwner` functions. Can only be called by the current owner.\\n     *\\n     * NOTE: Renouncing ownership will leave the contract without an owner,\\n     * thereby disabling any functionality that is only available to the owner.\\n     */\\n    function renounceOwnership() public virtual onlyOwner {\\n        _transferOwnership(address(0));\\n    }\\n\\n    /**\\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\\n     * Can only be called by the current owner.\\n     */\\n    function transferOwnership(address newOwner) public virtual onlyOwner {\\n        require(newOwner != address(0), \\\"Ownable: new owner is the zero address\\\");\\n        _transferOwnership(newOwner);\\n    }\\n\\n    /**\\n     * @dev Transfers ownership of the contract to a new account (`newOwner`).\\n     * Internal function without access restriction.\\n     */\\n    function _transferOwnership(address newOwner) internal virtual {\\n        address oldOwner = _owner;\\n        _owner = newOwner;\\n        emit OwnershipTransferred(oldOwner, newOwner);\\n    }\\n\\n    /**\\n     * @dev This empty reserved space is put in place to allow future versions to add new\\n     * variables without shifting down storage in the inheritance chain.\\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\\n     */\\n    uint256[49] private __gap;\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/interfaces/draft-IERC1822Upgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/draft-IERC1822.sol)\\n\\npragma solidity ^0.8.0;\\n\\n/**\\n * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified\\n * proxy whose upgrades are fully controlled by the current implementation.\\n */\\ninterface IERC1822ProxiableUpgradeable {\\n    /**\\n     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation\\n     * address.\\n     *\\n     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks\\n     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this\\n     * function revert if invoked through a proxy.\\n     */\\n    function proxiableUUID() external view returns (bytes32);\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/interfaces/IERC1967Upgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC1967.sol)\\n\\npragma solidity ^0.8.0;\\n\\n/**\\n * @dev ERC-1967: Proxy Storage Slots. This interface contains the events defined in the ERC.\\n *\\n * _Available since v4.8.3._\\n */\\ninterface IERC1967Upgradeable {\\n    /**\\n     * @dev Emitted when the implementation is upgraded.\\n     */\\n    event Upgraded(address indexed implementation);\\n\\n    /**\\n     * @dev Emitted when the admin account has changed.\\n     */\\n    event AdminChanged(address previousAdmin, address newAdmin);\\n\\n    /**\\n     * @dev Emitted when the beacon is changed.\\n     */\\n    event BeaconUpgraded(address indexed beacon);\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/proxy/beacon/IBeaconUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)\\n\\npragma solidity ^0.8.0;\\n\\n/**\\n * @dev This is the interface that {BeaconProxy} expects of its beacon.\\n */\\ninterface IBeaconUpgradeable {\\n    /**\\n     * @dev Must return an address that can be used as a delegate call target.\\n     *\\n     * {BeaconProxy} will check that this address is a contract.\\n     */\\n    function implementation() external view returns (address);\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/utils/StorageSlotUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/StorageSlot.sol)\\n// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.\\n\\npragma solidity ^0.8.0;\\n\\n/**\\n * @dev Library for reading and writing primitive types to specific storage slots.\\n *\\n * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.\\n * This library helps with reading and writing to such slots without the need for inline assembly.\\n *\\n * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.\\n *\\n * Example usage to set ERC1967 implementation slot:\\n * ```solidity\\n * contract ERC1967 {\\n *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\\n *\\n *     function _getImplementation() internal view returns (address) {\\n *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;\\n *     }\\n *\\n *     function _setImplementation(address newImplementation) internal {\\n *         require(Address.isContract(newImplementation), \\\"ERC1967: new implementation is not a contract\\\");\\n *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;\\n *     }\\n * }\\n * ```\\n *\\n * _Available since v4.1 for `address`, `bool`, `bytes32`, `uint256`._\\n * _Available since v4.9 for `string`, `bytes`._\\n */\\nlibrary StorageSlotUpgradeable {\\n    struct AddressSlot {\\n        address value;\\n    }\\n\\n    struct BooleanSlot {\\n        bool value;\\n    }\\n\\n    struct Bytes32Slot {\\n        bytes32 value;\\n    }\\n\\n    struct Uint256Slot {\\n        uint256 value;\\n    }\\n\\n    struct StringSlot {\\n        string value;\\n    }\\n\\n    struct BytesSlot {\\n        bytes value;\\n    }\\n\\n    /**\\n     * @dev Returns an `AddressSlot` with member `value` located at `slot`.\\n     */\\n    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {\\n        /// @solidity memory-safe-assembly\\n        assembly {\\n            r.slot := slot\\n        }\\n    }\\n\\n    /**\\n     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.\\n     */\\n    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {\\n        /// @solidity memory-safe-assembly\\n        assembly {\\n            r.slot := slot\\n        }\\n    }\\n\\n    /**\\n     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.\\n     */\\n    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {\\n        /// @solidity memory-safe-assembly\\n        assembly {\\n            r.slot := slot\\n        }\\n    }\\n\\n    /**\\n     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.\\n     */\\n    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {\\n        /// @solidity memory-safe-assembly\\n        assembly {\\n            r.slot := slot\\n        }\\n    }\\n\\n    /**\\n     * @dev Returns an `StringSlot` with member `value` located at `slot`.\\n     */\\n    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {\\n        /// @solidity memory-safe-assembly\\n        assembly {\\n            r.slot := slot\\n        }\\n    }\\n\\n    /**\\n     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.\\n     */\\n    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {\\n        /// @solidity memory-safe-assembly\\n        assembly {\\n            r.slot := store.slot\\n        }\\n    }\\n\\n    /**\\n     * @dev Returns an `BytesSlot` with member `value` located at `slot`.\\n     */\\n    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {\\n        /// @solidity memory-safe-assembly\\n        assembly {\\n            r.slot := slot\\n        }\\n    }\\n\\n    /**\\n     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.\\n     */\\n    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {\\n        /// @solidity memory-safe-assembly\\n        assembly {\\n            r.slot := store.slot\\n        }\\n    }\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/proxy/ERC1967/ERC1967UpgradeUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.9.0) (proxy/ERC1967/ERC1967Upgrade.sol)\\n\\npragma solidity ^0.8.2;\\n\\n\\n\\n\\n\\n\\n/**\\n * @dev This abstract contract provides getters and event emitting update functions for\\n * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.\\n *\\n * _Available since v4.1._\\n */\\nabstract contract ERC1967UpgradeUpgradeable is Initializable, IERC1967Upgradeable {\\n    // This is the keccak-256 hash of \\\"eip1967.proxy.rollback\\\" subtracted by 1\\n    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;\\n\\n    /**\\n     * @dev Storage slot with the address of the current implementation.\\n     * This is the keccak-256 hash of \\\"eip1967.proxy.implementation\\\" subtracted by 1, and is\\n     * validated in the constructor.\\n     */\\n    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\\n\\n    function __ERC1967Upgrade_init() internal onlyInitializing {\\n    }\\n\\n    function __ERC1967Upgrade_init_unchained() internal onlyInitializing {\\n    }\\n    /**\\n     * @dev Returns the current implementation address.\\n     */\\n    function _getImplementation() internal view returns (address) {\\n        return StorageSlotUpgradeable.getAddressSlot(_IMPLEMENTATION_SLOT).value;\\n    }\\n\\n    /**\\n     * @dev Stores a new address in the EIP1967 implementation slot.\\n     */\\n    function _setImplementation(address newImplementation) private {\\n        require(AddressUpgradeable.isContract(newImplementation), \\\"ERC1967: new implementation is not a contract\\\");\\n        StorageSlotUpgradeable.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;\\n    }\\n\\n    /**\\n     * @dev Perform implementation upgrade\\n     *\\n     * Emits an {Upgraded} event.\\n     */\\n    function _upgradeTo(address newImplementation) internal {\\n        _setImplementation(newImplementation);\\n        emit Upgraded(newImplementation);\\n    }\\n\\n    /**\\n     * @dev Perform implementation upgrade with additional setup call.\\n     *\\n     * Emits an {Upgraded} event.\\n     */\\n    function _upgradeToAndCall(address newImplementation, bytes memory data, bool forceCall) internal {\\n        _upgradeTo(newImplementation);\\n        if (data.length > 0 || forceCall) {\\n            AddressUpgradeable.functionDelegateCall(newImplementation, data);\\n        }\\n    }\\n\\n    /**\\n     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.\\n     *\\n     * Emits an {Upgraded} event.\\n     */\\n    function _upgradeToAndCallUUPS(address newImplementation, bytes memory data, bool forceCall) internal {\\n        // Upgrades from old implementations will perform a rollback test. This test requires the new\\n        // implementation to upgrade back to the old, non-ERC1822 compliant, implementation. Removing\\n        // this special case will break upgrade paths from old UUPS implementation to new ones.\\n        if (StorageSlotUpgradeable.getBooleanSlot(_ROLLBACK_SLOT).value) {\\n            _setImplementation(newImplementation);\\n        } else {\\n            try IERC1822ProxiableUpgradeable(newImplementation).proxiableUUID() returns (bytes32 slot) {\\n                require(slot == _IMPLEMENTATION_SLOT, \\\"ERC1967Upgrade: unsupported proxiableUUID\\\");\\n            } catch {\\n                revert(\\\"ERC1967Upgrade: new implementation is not UUPS\\\");\\n            }\\n            _upgradeToAndCall(newImplementation, data, forceCall);\\n        }\\n    }\\n\\n    /**\\n     * @dev Storage slot with the admin of the contract.\\n     * This is the keccak-256 hash of \\\"eip1967.proxy.admin\\\" subtracted by 1, and is\\n     * validated in the constructor.\\n     */\\n    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;\\n\\n    /**\\n     * @dev Returns the current admin.\\n     */\\n    function _getAdmin() internal view returns (address) {\\n        return StorageSlotUpgradeable.getAddressSlot(_ADMIN_SLOT).value;\\n    }\\n\\n    /**\\n     * @dev Stores a new address in the EIP1967 admin slot.\\n     */\\n    function _setAdmin(address newAdmin) private {\\n        require(newAdmin != address(0), \\\"ERC1967: new admin is the zero address\\\");\\n        StorageSlotUpgradeable.getAddressSlot(_ADMIN_SLOT).value = newAdmin;\\n    }\\n\\n    /**\\n     * @dev Changes the admin of the proxy.\\n     *\\n     * Emits an {AdminChanged} event.\\n     */\\n    function _changeAdmin(address newAdmin) internal {\\n        emit AdminChanged(_getAdmin(), newAdmin);\\n        _setAdmin(newAdmin);\\n    }\\n\\n    /**\\n     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.\\n     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.\\n     */\\n    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;\\n\\n    /**\\n     * @dev Returns the current beacon.\\n     */\\n    function _getBeacon() internal view returns (address) {\\n        return StorageSlotUpgradeable.getAddressSlot(_BEACON_SLOT).value;\\n    }\\n\\n    /**\\n     * @dev Stores a new beacon in the EIP1967 beacon slot.\\n     */\\n    function _setBeacon(address newBeacon) private {\\n        require(AddressUpgradeable.isContract(newBeacon), \\\"ERC1967: new beacon is not a contract\\\");\\n        require(\\n            AddressUpgradeable.isContract(IBeaconUpgradeable(newBeacon).implementation()),\\n            \\\"ERC1967: beacon implementation is not a contract\\\"\\n        );\\n        StorageSlotUpgradeable.getAddressSlot(_BEACON_SLOT).value = newBeacon;\\n    }\\n\\n    /**\\n     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does\\n     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).\\n     *\\n     * Emits a {BeaconUpgraded} event.\\n     */\\n    function _upgradeBeaconToAndCall(address newBeacon, bytes memory data, bool forceCall) internal {\\n        _setBeacon(newBeacon);\\n        emit BeaconUpgraded(newBeacon);\\n        if (data.length > 0 || forceCall) {\\n            AddressUpgradeable.functionDelegateCall(IBeaconUpgradeable(newBeacon).implementation(), data);\\n        }\\n    }\\n\\n    /**\\n     * @dev This empty reserved space is put in place to allow future versions to add new\\n     * variables without shifting down storage in the inheritance chain.\\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\\n     */\\n    uint256[50] private __gap;\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/proxy/utils/UUPSUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.9.0) (proxy/utils/UUPSUpgradeable.sol)\\n\\npragma solidity ^0.8.0;\\n\\n\\n\\n/**\\n * @dev An upgradeability mechanism designed for UUPS proxies. The functions included here can perform an upgrade of an\\n * {ERC1967Proxy}, when this contract is set as the implementation behind such a proxy.\\n *\\n * A security mechanism ensures that an upgrade does not turn off upgradeability accidentally, although this risk is\\n * reinstated if the upgrade retains upgradeability but removes the security mechanism, e.g. by replacing\\n * `UUPSUpgradeable` with a custom implementation of upgrades.\\n *\\n * The {_authorizeUpgrade} function must be overridden to include access restriction to the upgrade mechanism.\\n *\\n * _Available since v4.1._\\n */\\nabstract contract UUPSUpgradeable is Initializable, IERC1822ProxiableUpgradeable, ERC1967UpgradeUpgradeable {\\n    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable state-variable-assignment\\n    address private immutable __self = address(this);\\n\\n    /**\\n     * @dev Check that the execution is being performed through a delegatecall call and that the execution context is\\n     * a proxy contract with an implementation (as defined in ERC1967) pointing to self. This should only be the case\\n     * for UUPS and transparent proxies that are using the current contract as their implementation. Execution of a\\n     * function through ERC1167 minimal proxies (clones) would not normally pass this test, but is not guaranteed to\\n     * fail.\\n     */\\n    modifier onlyProxy() {\\n        require(address(this) != __self, \\\"Function must be called through delegatecall\\\");\\n        require(_getImplementation() == __self, \\\"Function must be called through active proxy\\\");\\n        _;\\n    }\\n\\n    /**\\n     * @dev Check that the execution is not being performed through a delegate call. This allows a function to be\\n     * callable on the implementing contract but not through proxies.\\n     */\\n    modifier notDelegated() {\\n        require(address(this) == __self, \\\"UUPSUpgradeable: must not be called through delegatecall\\\");\\n        _;\\n    }\\n\\n    function __UUPSUpgradeable_init() internal onlyInitializing {\\n    }\\n\\n    function __UUPSUpgradeable_init_unchained() internal onlyInitializing {\\n    }\\n    /**\\n     * @dev Implementation of the ERC1822 {proxiableUUID} function. This returns the storage slot used by the\\n     * implementation. It is used to validate the implementation's compatibility when performing an upgrade.\\n     *\\n     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks\\n     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this\\n     * function revert if invoked through a proxy. This is guaranteed by the `notDelegated` modifier.\\n     */\\n    function proxiableUUID() external view virtual override notDelegated returns (bytes32) {\\n        return _IMPLEMENTATION_SLOT;\\n    }\\n\\n    /**\\n     * @dev Upgrade the implementation of the proxy to `newImplementation`.\\n     *\\n     * Calls {_authorizeUpgrade}.\\n     *\\n     * Emits an {Upgraded} event.\\n     *\\n     * @custom:oz-upgrades-unsafe-allow-reachable delegatecall\\n     */\\n    function upgradeTo(address newImplementation) public virtual onlyProxy {\\n        _authorizeUpgrade(newImplementation);\\n        _upgradeToAndCallUUPS(newImplementation, new bytes(0), false);\\n    }\\n\\n    /**\\n     * @dev Upgrade the implementation of the proxy to `newImplementation`, and subsequently execute the function call\\n     * encoded in `data`.\\n     *\\n     * Calls {_authorizeUpgrade}.\\n     *\\n     * Emits an {Upgraded} event.\\n     *\\n     * @custom:oz-upgrades-unsafe-allow-reachable delegatecall\\n     */\\n    function upgradeToAndCall(address newImplementation, bytes memory data) public payable virtual onlyProxy {\\n        _authorizeUpgrade(newImplementation);\\n        _upgradeToAndCallUUPS(newImplementation, data, true);\\n    }\\n\\n    /**\\n     * @dev Function that should revert when `msg.sender` is not authorized to upgrade the contract. Called by\\n     * {upgradeTo} and {upgradeToAndCall}.\\n     *\\n     * Normally, this function will use an xref:access.adoc[access control] modifier such as {Ownable-onlyOwner}.\\n     *\\n     * ```solidity\\n     * function _authorizeUpgrade(address) internal override onlyOwner {}\\n     * ```\\n     */\\n    function _authorizeUpgrade(address newImplementation) internal virtual;\\n\\n    /**\\n     * @dev This empty reserved space is put in place to allow future versions to add new\\n     * variables without shifting down storage in the inheritance chain.\\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\\n     */\\n    uint256[50] private __gap;\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)\\n\\npragma solidity ^0.8.0;\\n\\n\\n/**\\n * @dev Contract module which allows children to implement an emergency stop\\n * mechanism that can be triggered by an authorized account.\\n *\\n * This module is used through inheritance. It will make available the\\n * modifiers `whenNotPaused` and `whenPaused`, which can be applied to\\n * the functions of your contract. Note that they will not be pausable by\\n * simply including this module, only once the modifiers are put in place.\\n */\\nabstract contract PausableUpgradeable is Initializable, ContextUpgradeable {\\n    /**\\n     * @dev Emitted when the pause is triggered by `account`.\\n     */\\n    event Paused(address account);\\n\\n    /**\\n     * @dev Emitted when the pause is lifted by `account`.\\n     */\\n    event Unpaused(address account);\\n\\n    bool private _paused;\\n\\n    /**\\n     * @dev Initializes the contract in unpaused state.\\n     */\\n    function __Pausable_init() internal onlyInitializing {\\n        __Pausable_init_unchained();\\n    }\\n\\n    function __Pausable_init_unchained() internal onlyInitializing {\\n        _paused = false;\\n    }\\n\\n    /**\\n     * @dev Modifier to make a function callable only when the contract is not paused.\\n     *\\n     * Requirements:\\n     *\\n     * - The contract must not be paused.\\n     */\\n    modifier whenNotPaused() {\\n        _requireNotPaused();\\n        _;\\n    }\\n\\n    /**\\n     * @dev Modifier to make a function callable only when the contract is paused.\\n     *\\n     * Requirements:\\n     *\\n     * - The contract must be paused.\\n     */\\n    modifier whenPaused() {\\n        _requirePaused();\\n        _;\\n    }\\n\\n    /**\\n     * @dev Returns true if the contract is paused, and false otherwise.\\n     */\\n    function paused() public view virtual returns (bool) {\\n        return _paused;\\n    }\\n\\n    /**\\n     * @dev Throws if the contract is paused.\\n     */\\n    function _requireNotPaused() internal view virtual {\\n        require(!paused(), \\\"Pausable: paused\\\");\\n    }\\n\\n    /**\\n     * @dev Throws if the contract is not paused.\\n     */\\n    function _requirePaused() internal view virtual {\\n        require(paused(), \\\"Pausable: not paused\\\");\\n    }\\n\\n    /**\\n     * @dev Triggers stopped state.\\n     *\\n     * Requirements:\\n     *\\n     * - The contract must not be paused.\\n     */\\n    function _pause() internal virtual whenNotPaused {\\n        _paused = true;\\n        emit Paused(_msgSender());\\n    }\\n\\n    /**\\n     * @dev Returns to normal state.\\n     *\\n     * Requirements:\\n     *\\n     * - The contract must be paused.\\n     */\\n    function _unpause() internal virtual whenPaused {\\n        _paused = false;\\n        emit Unpaused(_msgSender());\\n    }\\n\\n    /**\\n     * @dev This empty reserved space is put in place to allow future versions to add new\\n     * variables without shifting down storage in the inheritance chain.\\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\\n     */\\n    uint256[49] private __gap;\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)\\n\\npragma solidity ^0.8.0;\\n\\n/**\\n * @dev Interface of the ERC20 standard as defined in the EIP.\\n */\\ninterface IERC20Upgradeable {\\n    /**\\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\\n     * another (`to`).\\n     *\\n     * Note that `value` may be zero.\\n     */\\n    event Transfer(address indexed from, address indexed to, uint256 value);\\n\\n    /**\\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\\n     * a call to {approve}. `value` is the new allowance.\\n     */\\n    event Approval(address indexed owner, address indexed spender, uint256 value);\\n\\n    /**\\n     * @dev Returns the amount of tokens in existence.\\n     */\\n    function totalSupply() external view returns (uint256);\\n\\n    /**\\n     * @dev Returns the amount of tokens owned by `account`.\\n     */\\n    function balanceOf(address account) external view returns (uint256);\\n\\n    /**\\n     * @dev Moves `amount` tokens from the caller's account to `to`.\\n     *\\n     * Returns a boolean value indicating whether the operation succeeded.\\n     *\\n     * Emits a {Transfer} event.\\n     */\\n    function transfer(address to, uint256 amount) external returns (bool);\\n\\n    /**\\n     * @dev Returns the remaining number of tokens that `spender` will be\\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\\n     * zero by default.\\n     *\\n     * This value changes when {approve} or {transferFrom} are called.\\n     */\\n    function allowance(address owner, address spender) external view returns (uint256);\\n\\n    /**\\n     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.\\n     *\\n     * Returns a boolean value indicating whether the operation succeeded.\\n     *\\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\\n     * that someone may use both the old and the new allowance by unfortunate\\n     * transaction ordering. One possible solution to mitigate this race\\n     * condition is to first reduce the spender's allowance to 0 and set the\\n     * desired value afterwards:\\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\\n     *\\n     * Emits an {Approval} event.\\n     */\\n    function approve(address spender, uint256 amount) external returns (bool);\\n\\n    /**\\n     * @dev Moves `amount` tokens from `from` to `to` using the\\n     * allowance mechanism. `amount` is then deducted from the caller's\\n     * allowance.\\n     *\\n     * Returns a boolean value indicating whether the operation succeeded.\\n     *\\n     * Emits a {Transfer} event.\\n     */\\n    function transferFrom(address from, address to, uint256 amount) external returns (bool);\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/token/ERC20/extensions/IERC20MetadataUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)\\n\\npragma solidity ^0.8.0;\\n\\n/**\\n * @dev Interface for the optional metadata functions from the ERC20 standard.\\n *\\n * _Available since v4.1._\\n */\\ninterface IERC20MetadataUpgradeable is IERC20Upgradeable {\\n    /**\\n     * @dev Returns the name of the token.\\n     */\\n    function name() external view returns (string memory);\\n\\n    /**\\n     * @dev Returns the symbol of the token.\\n     */\\n    function symbol() external view returns (string memory);\\n\\n    /**\\n     * @dev Returns the decimals places of the token.\\n     */\\n    function decimals() external view returns (uint8);\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/ERC20.sol)\\n\\npragma solidity ^0.8.0;\\n\\n\\n\\n\\n/**\\n * @dev Implementation of the {IERC20} interface.\\n *\\n * This implementation is agnostic to the way tokens are created. This means\\n * that a supply mechanism has to be added in a derived contract using {_mint}.\\n * For a generic mechanism see {ERC20PresetMinterPauser}.\\n *\\n * TIP: For a detailed writeup see our guide\\n * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How\\n * to implement supply mechanisms].\\n *\\n * The default value of {decimals} is 18. To change this, you should override\\n * this function so it returns a different value.\\n *\\n * We have followed general OpenZeppelin Contracts guidelines: functions revert\\n * instead returning `false` on failure. This behavior is nonetheless\\n * conventional and does not conflict with the expectations of ERC20\\n * applications.\\n *\\n * Additionally, an {Approval} event is emitted on calls to {transferFrom}.\\n * This allows applications to reconstruct the allowance for all accounts just\\n * by listening to said events. Other implementations of the EIP may not emit\\n * these events, as it isn't required by the specification.\\n *\\n * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}\\n * functions have been added to mitigate the well-known issues around setting\\n * allowances. See {IERC20-approve}.\\n */\\ncontract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20Upgradeable, IERC20MetadataUpgradeable {\\n    mapping(address => uint256) private _balances;\\n\\n    mapping(address => mapping(address => uint256)) private _allowances;\\n\\n    uint256 private _totalSupply;\\n\\n    string private _name;\\n    string private _symbol;\\n\\n    /**\\n     * @dev Sets the values for {name} and {symbol}.\\n     *\\n     * All two of these values are immutable: they can only be set once during\\n     * construction.\\n     */\\n    function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {\\n        __ERC20_init_unchained(name_, symbol_);\\n    }\\n\\n    function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {\\n        _name = name_;\\n        _symbol = symbol_;\\n    }\\n\\n    /**\\n     * @dev Returns the name of the token.\\n     */\\n    function name() public view virtual override returns (string memory) {\\n        return _name;\\n    }\\n\\n    /**\\n     * @dev Returns the symbol of the token, usually a shorter version of the\\n     * name.\\n     */\\n    function symbol() public view virtual override returns (string memory) {\\n        return _symbol;\\n    }\\n\\n    /**\\n     * @dev Returns the number of decimals used to get its user representation.\\n     * For example, if `decimals` equals `2`, a balance of `505` tokens should\\n     * be displayed to a user as `5.05` (`505 / 10 ** 2`).\\n     *\\n     * Tokens usually opt for a value of 18, imitating the relationship between\\n     * Ether and Wei. This is the default value returned by this function, unless\\n     * it's overridden.\\n     *\\n     * NOTE: This information is only used for _display_ purposes: it in\\n     * no way affects any of the arithmetic of the contract, including\\n     * {IERC20-balanceOf} and {IERC20-transfer}.\\n     */\\n    function decimals() public view virtual override returns (uint8) {\\n        return 18;\\n    }\\n\\n    /**\\n     * @dev See {IERC20-totalSupply}.\\n     */\\n    function totalSupply() public view virtual override returns (uint256) {\\n        return _totalSupply;\\n    }\\n\\n    /**\\n     * @dev See {IERC20-balanceOf}.\\n     */\\n    function balanceOf(address account) public view virtual override returns (uint256) {\\n        return _balances[account];\\n    }\\n\\n    /**\\n     * @dev See {IERC20-transfer}.\\n     *\\n     * Requirements:\\n     *\\n     * - `to` cannot be the zero address.\\n     * - the caller must have a balance of at least `amount`.\\n     */\\n    function transfer(address to, uint256 amount) public virtual override returns (bool) {\\n        address owner = _msgSender();\\n        _transfer(owner, to, amount);\\n        return true;\\n    }\\n\\n    /**\\n     * @dev See {IERC20-allowance}.\\n     */\\n    function allowance(address owner, address spender) public view virtual override returns (uint256) {\\n        return _allowances[owner][spender];\\n    }\\n\\n    /**\\n     * @dev See {IERC20-approve}.\\n     *\\n     * NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on\\n     * `transferFrom`. This is semantically equivalent to an infinite approval.\\n     *\\n     * Requirements:\\n     *\\n     * - `spender` cannot be the zero address.\\n     */\\n    function approve(address spender, uint256 amount) public virtual override returns (bool) {\\n        address owner = _msgSender();\\n        _approve(owner, spender, amount);\\n        return true;\\n    }\\n\\n    /**\\n     * @dev See {IERC20-transferFrom}.\\n     *\\n     * Emits an {Approval} event indicating the updated allowance. This is not\\n     * required by the EIP. See the note at the beginning of {ERC20}.\\n     *\\n     * NOTE: Does not update the allowance if the current allowance\\n     * is the maximum `uint256`.\\n     *\\n     * Requirements:\\n     *\\n     * - `from` and `to` cannot be the zero address.\\n     * - `from` must have a balance of at least `amount`.\\n     * - the caller must have allowance for ``from``'s tokens of at least\\n     * `amount`.\\n     */\\n    function transferFrom(address from, address to, uint256 amount) public virtual override returns (bool) {\\n        address spender = _msgSender();\\n        _spendAllowance(from, spender, amount);\\n        _transfer(from, to, amount);\\n        return true;\\n    }\\n\\n    /**\\n     * @dev Atomically increases the allowance granted to `spender` by the caller.\\n     *\\n     * This is an alternative to {approve} that can be used as a mitigation for\\n     * problems described in {IERC20-approve}.\\n     *\\n     * Emits an {Approval} event indicating the updated allowance.\\n     *\\n     * Requirements:\\n     *\\n     * - `spender` cannot be the zero address.\\n     */\\n    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {\\n        address owner = _msgSender();\\n        _approve(owner, spender, allowance(owner, spender) + addedValue);\\n        return true;\\n    }\\n\\n    /**\\n     * @dev Atomically decreases the allowance granted to `spender` by the caller.\\n     *\\n     * This is an alternative to {approve} that can be used as a mitigation for\\n     * problems described in {IERC20-approve}.\\n     *\\n     * Emits an {Approval} event indicating the updated allowance.\\n     *\\n     * Requirements:\\n     *\\n     * - `spender` cannot be the zero address.\\n     * - `spender` must have allowance for the caller of at least\\n     * `subtractedValue`.\\n     */\\n    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {\\n        address owner = _msgSender();\\n        uint256 currentAllowance = allowance(owner, spender);\\n        require(currentAllowance >= subtractedValue, \\\"ERC20: decreased allowance below zero\\\");\\n        unchecked {\\n            _approve(owner, spender, currentAllowance - subtractedValue);\\n        }\\n\\n        return true;\\n    }\\n\\n    /**\\n     * @dev Moves `amount` of tokens from `from` to `to`.\\n     *\\n     * This internal function is equivalent to {transfer}, and can be used to\\n     * e.g. implement automatic token fees, slashing mechanisms, etc.\\n     *\\n     * Emits a {Transfer} event.\\n     *\\n     * Requirements:\\n     *\\n     * - `from` cannot be the zero address.\\n     * - `to` cannot be the zero address.\\n     * - `from` must have a balance of at least `amount`.\\n     */\\n    function _transfer(address from, address to, uint256 amount) internal virtual {\\n        require(from != address(0), \\\"ERC20: transfer from the zero address\\\");\\n        require(to != address(0), \\\"ERC20: transfer to the zero address\\\");\\n\\n        _beforeTokenTransfer(from, to, amount);\\n\\n        uint256 fromBalance = _balances[from];\\n        require(fromBalance >= amount, \\\"ERC20: transfer amount exceeds balance\\\");\\n        unchecked {\\n            _balances[from] = fromBalance - amount;\\n            // Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by\\n            // decrementing then incrementing.\\n            _balances[to] += amount;\\n        }\\n\\n        emit Transfer(from, to, amount);\\n\\n        _afterTokenTransfer(from, to, amount);\\n    }\\n\\n    /** @dev Creates `amount` tokens and assigns them to `account`, increasing\\n     * the total supply.\\n     *\\n     * Emits a {Transfer} event with `from` set to the zero address.\\n     *\\n     * Requirements:\\n     *\\n     * - `account` cannot be the zero address.\\n     */\\n    function _mint(address account, uint256 amount) internal virtual {\\n        require(account != address(0), \\\"ERC20: mint to the zero address\\\");\\n\\n        _beforeTokenTransfer(address(0), account, amount);\\n\\n        _totalSupply += amount;\\n        unchecked {\\n            // Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.\\n            _balances[account] += amount;\\n        }\\n        emit Transfer(address(0), account, amount);\\n\\n        _afterTokenTransfer(address(0), account, amount);\\n    }\\n\\n    /**\\n     * @dev Destroys `amount` tokens from `account`, reducing the\\n     * total supply.\\n     *\\n     * Emits a {Transfer} event with `to` set to the zero address.\\n     *\\n     * Requirements:\\n     *\\n     * - `account` cannot be the zero address.\\n     * - `account` must have at least `amount` tokens.\\n     */\\n    function _burn(address account, uint256 amount) internal virtual {\\n        require(account != address(0), \\\"ERC20: burn from the zero address\\\");\\n\\n        _beforeTokenTransfer(account, address(0), amount);\\n\\n        uint256 accountBalance = _balances[account];\\n        require(accountBalance >= amount, \\\"ERC20: burn amount exceeds balance\\\");\\n        unchecked {\\n            _balances[account] = accountBalance - amount;\\n            // Overflow not possible: amount <= accountBalance <= totalSupply.\\n            _totalSupply -= amount;\\n        }\\n\\n        emit Transfer(account, address(0), amount);\\n\\n        _afterTokenTransfer(account, address(0), amount);\\n    }\\n\\n    /**\\n     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.\\n     *\\n     * This internal function is equivalent to `approve`, and can be used to\\n     * e.g. set automatic allowances for certain subsystems, etc.\\n     *\\n     * Emits an {Approval} event.\\n     *\\n     * Requirements:\\n     *\\n     * - `owner` cannot be the zero address.\\n     * - `spender` cannot be the zero address.\\n     */\\n    function _approve(address owner, address spender, uint256 amount) internal virtual {\\n        require(owner != address(0), \\\"ERC20: approve from the zero address\\\");\\n        require(spender != address(0), \\\"ERC20: approve to the zero address\\\");\\n\\n        _allowances[owner][spender] = amount;\\n        emit Approval(owner, spender, amount);\\n    }\\n\\n    /**\\n     * @dev Updates `owner` s allowance for `spender` based on spent `amount`.\\n     *\\n     * Does not update the allowance amount in case of infinite allowance.\\n     * Revert if not enough allowance is available.\\n     *\\n     * Might emit an {Approval} event.\\n     */\\n    function _spendAllowance(address owner, address spender, uint256 amount) internal virtual {\\n        uint256 currentAllowance = allowance(owner, spender);\\n        if (currentAllowance != type(uint256).max) {\\n            require(currentAllowance >= amount, \\\"ERC20: insufficient allowance\\\");\\n            unchecked {\\n                _approve(owner, spender, currentAllowance - amount);\\n            }\\n        }\\n    }\\n\\n    /**\\n     * @dev Hook that is called before any transfer of tokens. This includes\\n     * minting and burning.\\n     *\\n     * Calling conditions:\\n     *\\n     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens\\n     * will be transferred to `to`.\\n     * - when `from` is zero, `amount` tokens will be minted for `to`.\\n     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.\\n     * - `from` and `to` are never both zero.\\n     *\\n     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].\\n     */\\n    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual {}\\n\\n    /**\\n     * @dev Hook that is called after any transfer of tokens. This includes\\n     * minting and burning.\\n     *\\n     * Calling conditions:\\n     *\\n     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens\\n     * has been transferred to `to`.\\n     * - when `from` is zero, `amount` tokens have been minted for `to`.\\n     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.\\n     * - `from` and `to` are never both zero.\\n     *\\n     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].\\n     */\\n    function _afterTokenTransfer(address from, address to, uint256 amount) internal virtual {}\\n\\n    /**\\n     * @dev This empty reserved space is put in place to allow future versions to add new\\n     * variables without shifting down storage in the inheritance chain.\\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\\n     */\\n    uint256[45] private __gap;\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20BurnableUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/extensions/ERC20Burnable.sol)\\n\\npragma solidity ^0.8.0;\\n\\n\\n\\n/**\\n * @dev Extension of {ERC20} that allows token holders to destroy both their own\\n * tokens and those that they have an allowance for, in a way that can be\\n * recognized off-chain (via event analysis).\\n */\\nabstract contract ERC20BurnableUpgradeable is Initializable, ContextUpgradeable, ERC20Upgradeable {\\n    function __ERC20Burnable_init() internal onlyInitializing {\\n    }\\n\\n    function __ERC20Burnable_init_unchained() internal onlyInitializing {\\n    }\\n    /**\\n     * @dev Destroys `amount` tokens from the caller.\\n     *\\n     * See {ERC20-_burn}.\\n     */\\n    function burn(uint256 amount) public virtual {\\n        _burn(_msgSender(), amount);\\n    }\\n\\n    /**\\n     * @dev Destroys `amount` tokens from `account`, deducting from the caller's\\n     * allowance.\\n     *\\n     * See {ERC20-_burn} and {ERC20-allowance}.\\n     *\\n     * Requirements:\\n     *\\n     * - the caller must have allowance for ``accounts``'s tokens of at least\\n     * `amount`.\\n     */\\n    function burnFrom(address account, uint256 amount) public virtual {\\n        _spendAllowance(account, _msgSender(), amount);\\n        _burn(account, amount);\\n    }\\n\\n    /**\\n     * @dev This empty reserved space is put in place to allow future versions to add new\\n     * variables without shifting down storage in the inheritance chain.\\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\\n     */\\n    uint256[50] private __gap;\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20PausableUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/ERC20Pausable.sol)\\n\\npragma solidity ^0.8.0;\\n\\n\\n\\n/**\\n * @dev ERC20 token with pausable token transfers, minting and burning.\\n *\\n * Useful for scenarios such as preventing trades until the end of an evaluation\\n * period, or having an emergency switch for freezing all token transfers in the\\n * event of a large bug.\\n *\\n * IMPORTANT: This contract does not include public pause and unpause functions. In\\n * addition to inheriting this contract, you must define both functions, invoking the\\n * {Pausable-_pause} and {Pausable-_unpause} internal functions, with appropriate\\n * access control, e.g. using {AccessControl} or {Ownable}. Not doing so will\\n * make the contract unpausable.\\n */\\nabstract contract ERC20PausableUpgradeable is Initializable, ERC20Upgradeable, PausableUpgradeable {\\n    function __ERC20Pausable_init() internal onlyInitializing {\\n        __Pausable_init_unchained();\\n    }\\n\\n    function __ERC20Pausable_init_unchained() internal onlyInitializing {\\n    }\\n    /**\\n     * @dev See {ERC20-_beforeTokenTransfer}.\\n     *\\n     * Requirements:\\n     *\\n     * - the contract must not be paused.\\n     */\\n    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {\\n        super._beforeTokenTransfer(from, to, amount);\\n\\n        require(!paused(), \\\"ERC20Pausable: token transfer while paused\\\");\\n    }\\n\\n    /**\\n     * @dev This empty reserved space is put in place to allow future versions to add new\\n     * variables without shifting down storage in the inheritance chain.\\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\\n     */\\n    uint256[50] private __gap;\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/token/ERC20/presets/ERC20PresetMinterPauserUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/presets/ERC20PresetMinterPauser.sol)\\n\\npragma solidity ^0.8.0;\\n\\n\\n\\n\\n\\n\\n/**\\n * @dev {ERC20} token, including:\\n *\\n *  - ability for holders to burn (destroy) their tokens\\n *  - a minter role that allows for token minting (creation)\\n *  - a pauser role that allows to stop all token transfers\\n *\\n * This contract uses {AccessControl} to lock permissioned functions using the\\n * different roles - head to its documentation for details.\\n *\\n * The account that deploys the contract will be granted the minter and pauser\\n * roles, as well as the default admin role, which will let it grant both minter\\n * and pauser roles to other accounts.\\n *\\n * _Deprecated in favor of https://wizard.openzeppelin.com/[Contracts Wizard]._\\n */\\ncontract ERC20PresetMinterPauserUpgradeable is Initializable, ContextUpgradeable, AccessControlEnumerableUpgradeable, ERC20BurnableUpgradeable, ERC20PausableUpgradeable {\\n    bytes32 public constant MINTER_ROLE = keccak256(\\\"MINTER_ROLE\\\");\\n    bytes32 public constant PAUSER_ROLE = keccak256(\\\"PAUSER_ROLE\\\");\\n\\n    function initialize(string memory name, string memory symbol) public virtual initializer {\\n        __ERC20PresetMinterPauser_init(name, symbol);\\n    }\\n    /**\\n     * @dev Grants `DEFAULT_ADMIN_ROLE`, `MINTER_ROLE` and `PAUSER_ROLE` to the\\n     * account that deploys the contract.\\n     *\\n     * See {ERC20-constructor}.\\n     */\\n    function __ERC20PresetMinterPauser_init(string memory name, string memory symbol) internal onlyInitializing {\\n        __ERC20_init_unchained(name, symbol);\\n        __Pausable_init_unchained();\\n        __ERC20PresetMinterPauser_init_unchained(name, symbol);\\n    }\\n\\n    function __ERC20PresetMinterPauser_init_unchained(string memory, string memory) internal onlyInitializing {\\n        _setupRole(DEFAULT_ADMIN_ROLE, _msgSender());\\n\\n        _setupRole(MINTER_ROLE, _msgSender());\\n        _setupRole(PAUSER_ROLE, _msgSender());\\n    }\\n\\n    /**\\n     * @dev Creates `amount` new tokens for `to`.\\n     *\\n     * See {ERC20-_mint}.\\n     *\\n     * Requirements:\\n     *\\n     * - the caller must have the `MINTER_ROLE`.\\n     */\\n    function mint(address to, uint256 amount) public virtual {\\n        require(hasRole(MINTER_ROLE, _msgSender()), \\\"ERC20PresetMinterPauser: must have minter role to mint\\\");\\n        _mint(to, amount);\\n    }\\n\\n    /**\\n     * @dev Pauses all token transfers.\\n     *\\n     * See {ERC20Pausable} and {Pausable-_pause}.\\n     *\\n     * Requirements:\\n     *\\n     * - the caller must have the `PAUSER_ROLE`.\\n     */\\n    function pause() public virtual {\\n        require(hasRole(PAUSER_ROLE, _msgSender()), \\\"ERC20PresetMinterPauser: must have pauser role to pause\\\");\\n        _pause();\\n    }\\n\\n    /**\\n     * @dev Unpauses all token transfers.\\n     *\\n     * See {ERC20Pausable} and {Pausable-_unpause}.\\n     *\\n     * Requirements:\\n     *\\n     * - the caller must have the `PAUSER_ROLE`.\\n     */\\n    function unpause() public virtual {\\n        require(hasRole(PAUSER_ROLE, _msgSender()), \\\"ERC20PresetMinterPauser: must have pauser role to unpause\\\");\\n        _unpause();\\n    }\\n\\n    function _beforeTokenTransfer(\\n        address from,\\n        address to,\\n        uint256 amount\\n    ) internal virtual override(ERC20Upgradeable, ERC20PausableUpgradeable) {\\n        super._beforeTokenTransfer(from, to, amount);\\n    }\\n\\n    /**\\n     * @dev This empty reserved space is put in place to allow future versions to add new\\n     * variables without shifting down storage in the inheritance chain.\\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\\n     */\\n    uint256[50] private __gap;\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/interfaces/IERC5267Upgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC5267.sol)\\n\\npragma solidity ^0.8.0;\\n\\ninterface IERC5267Upgradeable {\\n    /**\\n     * @dev MAY be emitted to signal that the domain could have changed.\\n     */\\n    event EIP712DomainChanged();\\n\\n    /**\\n     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712\\n     * signature.\\n     */\\n    function eip712Domain()\\n        external\\n        view\\n        returns (\\n            bytes1 fields,\\n            string memory name,\\n            string memory version,\\n            uint256 chainId,\\n            address verifyingContract,\\n            bytes32 salt,\\n            uint256[] memory extensions\\n        );\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/utils/cryptography/ECDSAUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/ECDSA.sol)\\n\\npragma solidity ^0.8.0;\\n\\n/**\\n * @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.\\n *\\n * These functions can be used to verify that a message was signed by the holder\\n * of the private keys of a given address.\\n */\\nlibrary ECDSAUpgradeable {\\n    enum RecoverError {\\n        NoError,\\n        InvalidSignature,\\n        InvalidSignatureLength,\\n        InvalidSignatureS,\\n        InvalidSignatureV // Deprecated in v4.8\\n    }\\n\\n    function _throwError(RecoverError error) private pure {\\n        if (error == RecoverError.NoError) {\\n            return; // no error: do nothing\\n        } else if (error == RecoverError.InvalidSignature) {\\n            revert(\\\"ECDSA: invalid signature\\\");\\n        } else if (error == RecoverError.InvalidSignatureLength) {\\n            revert(\\\"ECDSA: invalid signature length\\\");\\n        } else if (error == RecoverError.InvalidSignatureS) {\\n            revert(\\\"ECDSA: invalid signature 's' value\\\");\\n        }\\n    }\\n\\n    /**\\n     * @dev Returns the address that signed a hashed message (`hash`) with\\n     * `signature` or error string. This address can then be used for verification purposes.\\n     *\\n     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:\\n     * this function rejects them by requiring the `s` value to be in the lower\\n     * half order, and the `v` value to be either 27 or 28.\\n     *\\n     * IMPORTANT: `hash` _must_ be the result of a hash operation for the\\n     * verification to be secure: it is possible to craft signatures that\\n     * recover to arbitrary addresses for non-hashed data. A safe way to ensure\\n     * this is by receiving a hash of the original message (which may otherwise\\n     * be too long), and then calling {toEthSignedMessageHash} on it.\\n     *\\n     * Documentation for signature generation:\\n     * - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]\\n     * - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]\\n     *\\n     * _Available since v4.3._\\n     */\\n    function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {\\n        if (signature.length == 65) {\\n            bytes32 r;\\n            bytes32 s;\\n            uint8 v;\\n            // ecrecover takes the signature parameters, and the only way to get them\\n            // currently is to use assembly.\\n            /// @solidity memory-safe-assembly\\n            assembly {\\n                r := mload(add(signature, 0x20))\\n                s := mload(add(signature, 0x40))\\n                v := byte(0, mload(add(signature, 0x60)))\\n            }\\n            return tryRecover(hash, v, r, s);\\n        } else {\\n            return (address(0), RecoverError.InvalidSignatureLength);\\n        }\\n    }\\n\\n    /**\\n     * @dev Returns the address that signed a hashed message (`hash`) with\\n     * `signature`. This address can then be used for verification purposes.\\n     *\\n     * The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:\\n     * this function rejects them by requiring the `s` value to be in the lower\\n     * half order, and the `v` value to be either 27 or 28.\\n     *\\n     * IMPORTANT: `hash` _must_ be the result of a hash operation for the\\n     * verification to be secure: it is possible to craft signatures that\\n     * recover to arbitrary addresses for non-hashed data. A safe way to ensure\\n     * this is by receiving a hash of the original message (which may otherwise\\n     * be too long), and then calling {toEthSignedMessageHash} on it.\\n     */\\n    function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {\\n        (address recovered, RecoverError error) = tryRecover(hash, signature);\\n        _throwError(error);\\n        return recovered;\\n    }\\n\\n    /**\\n     * @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.\\n     *\\n     * See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]\\n     *\\n     * _Available since v4.3._\\n     */\\n    function tryRecover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address, RecoverError) {\\n        bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);\\n        uint8 v = uint8((uint256(vs) >> 255) + 27);\\n        return tryRecover(hash, v, r, s);\\n    }\\n\\n    /**\\n     * @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.\\n     *\\n     * _Available since v4.2._\\n     */\\n    function recover(bytes32 hash, bytes32 r, bytes32 vs) internal pure returns (address) {\\n        (address recovered, RecoverError error) = tryRecover(hash, r, vs);\\n        _throwError(error);\\n        return recovered;\\n    }\\n\\n    /**\\n     * @dev Overload of {ECDSA-tryRecover} that receives the `v`,\\n     * `r` and `s` signature fields separately.\\n     *\\n     * _Available since v4.3._\\n     */\\n    function tryRecover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address, RecoverError) {\\n        // EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature\\n        // unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines\\n        // the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most\\n        // signatures from current libraries generate a unique signature with an s-value in the lower half order.\\n        //\\n        // If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value\\n        // with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or\\n        // vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept\\n        // these malleable signatures as well.\\n        if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {\\n            return (address(0), RecoverError.InvalidSignatureS);\\n        }\\n\\n        // If the signature is valid (and not malleable), return the signer address\\n        address signer = ecrecover(hash, v, r, s);\\n        if (signer == address(0)) {\\n            return (address(0), RecoverError.InvalidSignature);\\n        }\\n\\n        return (signer, RecoverError.NoError);\\n    }\\n\\n    /**\\n     * @dev Overload of {ECDSA-recover} that receives the `v`,\\n     * `r` and `s` signature fields separately.\\n     */\\n    function recover(bytes32 hash, uint8 v, bytes32 r, bytes32 s) internal pure returns (address) {\\n        (address recovered, RecoverError error) = tryRecover(hash, v, r, s);\\n        _throwError(error);\\n        return recovered;\\n    }\\n\\n    /**\\n     * @dev Returns an Ethereum Signed Message, created from a `hash`. This\\n     * produces hash corresponding to the one signed with the\\n     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]\\n     * JSON-RPC method as part of EIP-191.\\n     *\\n     * See {recover}.\\n     */\\n    function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32 message) {\\n        // 32 is the length in bytes of hash,\\n        // enforced by the type signature above\\n        /// @solidity memory-safe-assembly\\n        assembly {\\n            mstore(0x00, \\\"\\\\x19Ethereum Signed Message:\\\\n32\\\")\\n            mstore(0x1c, hash)\\n            message := keccak256(0x00, 0x3c)\\n        }\\n    }\\n\\n    /**\\n     * @dev Returns an Ethereum Signed Message, created from `s`. This\\n     * produces hash corresponding to the one signed with the\\n     * https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]\\n     * JSON-RPC method as part of EIP-191.\\n     *\\n     * See {recover}.\\n     */\\n    function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {\\n        return keccak256(abi.encodePacked(\\\"\\\\x19Ethereum Signed Message:\\\\n\\\", StringsUpgradeable.toString(s.length), s));\\n    }\\n\\n    /**\\n     * @dev Returns an Ethereum Signed Typed Data, created from a\\n     * `domainSeparator` and a `structHash`. This produces hash corresponding\\n     * to the one signed with the\\n     * https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]\\n     * JSON-RPC method as part of EIP-712.\\n     *\\n     * See {recover}.\\n     */\\n    function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32 data) {\\n        /// @solidity memory-safe-assembly\\n        assembly {\\n            let ptr := mload(0x40)\\n            mstore(ptr, \\\"\\\\x19\\\\x01\\\")\\n            mstore(add(ptr, 0x02), domainSeparator)\\n            mstore(add(ptr, 0x22), structHash)\\n            data := keccak256(ptr, 0x42)\\n        }\\n    }\\n\\n    /**\\n     * @dev Returns an Ethereum Signed Data with intended validator, created from a\\n     * `validator` and `data` according to the version 0 of EIP-191.\\n     *\\n     * See {recover}.\\n     */\\n    function toDataWithIntendedValidatorHash(address validator, bytes memory data) internal pure returns (bytes32) {\\n        return keccak256(abi.encodePacked(\\\"\\\\x19\\\\x00\\\", validator, data));\\n    }\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/utils/cryptography/EIP712Upgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.9.0) (utils/cryptography/EIP712.sol)\\n\\npragma solidity ^0.8.8;\\n\\n\\n\\n/**\\n * @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.\\n *\\n * The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,\\n * thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding\\n * they need in their contracts using a combination of `abi.encode` and `keccak256`.\\n *\\n * This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding\\n * scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA\\n * ({_hashTypedDataV4}).\\n *\\n * The implementation of the domain separator was designed to be as efficient as possible while still properly updating\\n * the chain id to protect against replay attacks on an eventual fork of the chain.\\n *\\n * NOTE: This contract implements the version of the encoding known as \\\"v4\\\", as implemented by the JSON RPC method\\n * https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].\\n *\\n * NOTE: In the upgradeable version of this contract, the cached values will correspond to the address, and the domain\\n * separator of the implementation contract. This will cause the `_domainSeparatorV4` function to always rebuild the\\n * separator from the immutable values, which is cheaper than accessing a cached version in cold storage.\\n *\\n * _Available since v3.4._\\n *\\n * @custom:storage-size 52\\n */\\nabstract contract EIP712Upgradeable is Initializable, IERC5267Upgradeable {\\n    bytes32 private constant _TYPE_HASH =\\n        keccak256(\\\"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)\\\");\\n\\n    /// @custom:oz-renamed-from _HASHED_NAME\\n    bytes32 private _hashedName;\\n    /// @custom:oz-renamed-from _HASHED_VERSION\\n    bytes32 private _hashedVersion;\\n\\n    string private _name;\\n    string private _version;\\n\\n    /**\\n     * @dev Initializes the domain separator and parameter caches.\\n     *\\n     * The meaning of `name` and `version` is specified in\\n     * https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:\\n     *\\n     * - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.\\n     * - `version`: the current major version of the signing domain.\\n     *\\n     * NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart\\n     * contract upgrade].\\n     */\\n    function __EIP712_init(string memory name, string memory version) internal onlyInitializing {\\n        __EIP712_init_unchained(name, version);\\n    }\\n\\n    function __EIP712_init_unchained(string memory name, string memory version) internal onlyInitializing {\\n        _name = name;\\n        _version = version;\\n\\n        // Reset prior values in storage if upgrading\\n        _hashedName = 0;\\n        _hashedVersion = 0;\\n    }\\n\\n    /**\\n     * @dev Returns the domain separator for the current chain.\\n     */\\n    function _domainSeparatorV4() internal view returns (bytes32) {\\n        return _buildDomainSeparator();\\n    }\\n\\n    function _buildDomainSeparator() private view returns (bytes32) {\\n        return keccak256(abi.encode(_TYPE_HASH, _EIP712NameHash(), _EIP712VersionHash(), block.chainid, address(this)));\\n    }\\n\\n    /**\\n     * @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this\\n     * function returns the hash of the fully encoded EIP712 message for this domain.\\n     *\\n     * This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:\\n     *\\n     * ```solidity\\n     * bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(\\n     *     keccak256(\\\"Mail(address to,string contents)\\\"),\\n     *     mailTo,\\n     *     keccak256(bytes(mailContents))\\n     * )));\\n     * address signer = ECDSA.recover(digest, signature);\\n     * ```\\n     */\\n    function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {\\n        return ECDSAUpgradeable.toTypedDataHash(_domainSeparatorV4(), structHash);\\n    }\\n\\n    /**\\n     * @dev See {EIP-5267}.\\n     *\\n     * _Available since v4.9._\\n     */\\n    function eip712Domain()\\n        public\\n        view\\n        virtual\\n        override\\n        returns (\\n            bytes1 fields,\\n            string memory name,\\n            string memory version,\\n            uint256 chainId,\\n            address verifyingContract,\\n            bytes32 salt,\\n            uint256[] memory extensions\\n        )\\n    {\\n        // If the hashed name and version in storage are non-zero, the contract hasn't been properly initialized\\n        // and the EIP712 domain is not reliable, as it will be missing name and version.\\n        require(_hashedName == 0 && _hashedVersion == 0, \\\"EIP712: Uninitialized\\\");\\n\\n        return (\\n            hex\\\"0f\\\", // 01111\\n            _EIP712Name(),\\n            _EIP712Version(),\\n            block.chainid,\\n            address(this),\\n            bytes32(0),\\n            new uint256[](0)\\n        );\\n    }\\n\\n    /**\\n     * @dev The name parameter for the EIP712 domain.\\n     *\\n     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs\\n     * are a concern.\\n     */\\n    function _EIP712Name() internal virtual view returns (string memory) {\\n        return _name;\\n    }\\n\\n    /**\\n     * @dev The version parameter for the EIP712 domain.\\n     *\\n     * NOTE: This function reads from storage by default, but can be redefined to return a constant value if gas costs\\n     * are a concern.\\n     */\\n    function _EIP712Version() internal virtual view returns (string memory) {\\n        return _version;\\n    }\\n\\n    /**\\n     * @dev The hash of the name parameter for the EIP712 domain.\\n     *\\n     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Name` instead.\\n     */\\n    function _EIP712NameHash() internal view returns (bytes32) {\\n        string memory name = _EIP712Name();\\n        if (bytes(name).length > 0) {\\n            return keccak256(bytes(name));\\n        } else {\\n            // If the name is empty, the contract may have been upgraded without initializing the new storage.\\n            // We return the name hash in storage if non-zero, otherwise we assume the name is empty by design.\\n            bytes32 hashedName = _hashedName;\\n            if (hashedName != 0) {\\n                return hashedName;\\n            } else {\\n                return keccak256(\\\"\\\");\\n            }\\n        }\\n    }\\n\\n    /**\\n     * @dev The hash of the version parameter for the EIP712 domain.\\n     *\\n     * NOTE: In previous versions this function was virtual. In this version you should override `_EIP712Version` instead.\\n     */\\n    function _EIP712VersionHash() internal view returns (bytes32) {\\n        string memory version = _EIP712Version();\\n        if (bytes(version).length > 0) {\\n            return keccak256(bytes(version));\\n        } else {\\n            // If the version is empty, the contract may have been upgraded without initializing the new storage.\\n            // We return the version hash in storage if non-zero, otherwise we assume the version is empty by design.\\n            bytes32 hashedVersion = _hashedVersion;\\n            if (hashedVersion != 0) {\\n                return hashedVersion;\\n            } else {\\n                return keccak256(\\\"\\\");\\n            }\\n        }\\n    }\\n\\n    /**\\n     * @dev This empty reserved space is put in place to allow future versions to add new\\n     * variables without shifting down storage in the inheritance chain.\\n     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps\\n     */\\n    uint256[48] private __gap;\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/utils/cryptography/draft-EIP712Upgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/draft-EIP712.sol)\\n\\npragma solidity ^0.8.0;\\n\\n// EIP-712 is Final as of 2022-08-11. This file is deprecated.\\n\\n\\n// File Contracts/Blacklistable.sol\\n\\n/**\\n *\\n * Copyright (c) 2023 SCEME SAS\\n *\\n * Permission is hereby granted, free of charge, to any person obtaining a copy\\n * of this software and associated documentation files (the \\\"Software\\\"), to deal\\n * in the Software without restriction, including without limitation the rights\\n * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\\n * copies of the Software, and to permit persons to whom the Software is\\n * furnished to do so, subject to the following conditions:\\n *\\n * The above copyright notice and this permission notice shall be included in\\n * copies or substantial portions of the Software.\\n *\\n * THE SOFTWARE IS PROVIDED \\\"AS IS\\\", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\\n * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\\n * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\\n * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\\n * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,\\n * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE\\n * SOFTWARE.\\n */\\n\\npragma solidity ^0.8.0;\\n\\n/**\\n * @title Blacklistable Token\\n * @dev Allows accounts to be blacklisted by a \\\"blacklister\\\" role\\n */\\ncontract Blacklistable is OwnableUpgradeable {\\n    address public blacklister;\\n    mapping(address => bool) internal blacklisted;\\n\\n    event Blacklisted(address indexed _account);\\n    event UnBlacklisted(address indexed _account);\\n    event BlacklisterChanged(address indexed newBlacklister);\\n\\n    /**\\n     * @dev Throws if called by any account other than the blacklister\\n     */\\n    modifier onlyBlacklister() {\\n        require(\\n            msg.sender == blacklister,\\n            \\\"Blacklistable: caller is not the blacklister\\\"\\n        );\\n        _;\\n    }\\n\\n    /**\\n     * @dev Throws if argument account is blacklisted\\n     * @param account The address to check\\n     */\\n    modifier notBlacklisted(address account) {\\n        require(\\n            !blacklisted[account],\\n            \\\"Blacklistable: account is blacklisted\\\"\\n        );\\n        _;\\n    }\\n\\n    /**\\n     * @dev Checks if account is blacklisted\\n     * @param account The address to check\\n     */\\n    function isBlacklisted(address account) external view returns (bool) {\\n        return blacklisted[account];\\n    }\\n\\n    /**\\n     * @dev Adds account to blacklist\\n     * @param account The address to blacklist\\n     */\\n    function blacklist(address account) external onlyBlacklister {\\n        blacklisted[account] = true;\\n        emit Blacklisted(account);\\n    }\\n\\n    /**\\n     * @dev Removes account from blacklist\\n     * @param account The address to remove from the blacklist\\n     */\\n    function unBlacklist(address account) external onlyBlacklister {\\n        blacklisted[account] = false;\\n        emit UnBlacklisted(account);\\n    }\\n\\n    function updateBlacklister(address newBlacklister) internal {\\n        require(\\n            newBlacklister != address(0),\\n            \\\"Blacklistable: new blacklister is the zero address\\\"\\n        );\\n        blacklister = newBlacklister;\\n        emit BlacklisterChanged(blacklister);\\n    }\\n\\n    uint256[50] private __gap;\\n}\\n\\n\\n// File @openzeppelin/contracts-upgradeable/utils/CountersUpgradeable.sol@v4.9.6\\n\\n// Original license: SPDX_License_Identifier: MIT\\n// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)\\n\\npragma solidity ^0.8.0;\\n\\n/**\\n * @title Counters\\n * @author Matt Condon (@shrugs)\\n * @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number\\n * of elements in a mapping, issuing ERC721 ids, or counting request ids.\\n *\\n * Include with `using Counters for Counters.Counter;`\\n */\\nlibrary CountersUpgradeable {\\n    struct Counter {\\n        // This variable should never be directly accessed by users of the library: interactions must be restricted to\\n        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add\\n        // this feature: see https://github.com/ethereum/solidity/issues/4637\\n        uint256 _value; // default: 0\\n    }\\n\\n    function current(Counter storage counter) internal view returns (uint256) {\\n        return counter._value;\\n    }\\n\\n    function increment(Counter storage counter) internal {\\n        unchecked {\\n            counter._value += 1;\\n        }\\n    }\\n\\n    function decrement(Counter storage counter) internal {\\n        uint256 value = counter._value;\\n        require(value > 0, \\\"Counter: decrement overflow\\\");\\n        unchecked {\\n            counter._value = value - 1;\\n        }\\n    }\\n\\n    function reset(Counter storage counter) internal {\\n        counter._value = 0;\\n    }\\n}\\n\\n\\n// File Contracts/ERC20MetaTxUpgradeable.sol\\n\\n/**\\n *\\n * Copyright (c) 2023 SCEME SAS\\n *\\n * Permission is hereby granted, free of charge, to any person obtaining a copy\\n * of this software and associated documentation files (the \\\"Software\\\"), to deal\\n * in the Software without restriction, including without limitation the rights\\n * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\\n * copies of the Software, and to permit persons to whom the Software is\\n * furnished to do so, subject to the following conditions:\\n *\\n * The above copyright notice and this permission notice shall be included in\\n * copies or substantial portions of the Software.\\n *\\n * THE SOFTWARE IS PROVIDED \\\"AS IS\\\", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\\n * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\\n * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\\n * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\\n * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,\\n * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE\\n * SOFTWARE.\\n */\\n// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-ERC20Permit.sol)\\n\\npragma solidity ^0.8.0;\\n\\n\\n\\n\\n\\n/**\\n * @dev Implementation of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in\\n * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].\\n *\\n * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by\\n * presenting a message signed by the account. By not relying on `{IERC20-approve}`, the token holder account doesn't\\n * need to send a transaction, and thus is not required to hold Ether at all.\\n *\\n * _Available since v3.4._\\n */\\nabstract contract ERC20MetaTxUpgradeable is Initializable, ERC20Upgradeable, EIP712Upgradeable {\\n    using CountersUpgradeable for CountersUpgradeable.Counter;\\n\\n    mapping(address => CountersUpgradeable.Counter) private _nonces;\\n\\n    // solhint-disable-next-line var-name-mixedcase\\n    bytes32 private _PERMIT_TYPEHASH;\\n    bytes32 private _TWA_TYPEHASH;\\n\\n    /**\\n     * @dev Initializes the {EIP712} domain separator using the `name` parameter, and setting `version` to `\\\"1\\\"`.\\n     *\\n     * It's a good idea to use the same `name` that is defined as the ERC20 token name.\\n     */\\n    function __ERC20MetaTx_init(string memory name) internal onlyInitializing {\\n        __Context_init_unchained();\\n        __EIP712_init_unchained(name, \\\"1\\\");\\n        __ERC20MetaTx_init_unchained();\\n    }\\n\\n    function __ERC20MetaTx_init_unchained() internal onlyInitializing {\\n        _PERMIT_TYPEHASH = keccak256(\\n            \\\"Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)\\\"\\n        );\\n        _TWA_TYPEHASH = keccak256(\\n            \\\"TransferWithAuthorization(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)\\\"\\n        );\\n    }\\n\\n    /**\\n     * @dev See {IERC20Permit-permit}.\\n     */\\n    function permit(\\n        address owner,\\n        address spender,\\n        uint256 value,\\n        uint256 deadline,\\n        uint8 v,\\n        bytes32 r,\\n        bytes32 s\\n    ) external virtual {\\n        require(block.timestamp <= deadline, \\\"ERC20Permit: expired deadline\\\");\\n\\n        bytes32 structHash = keccak256(abi.encode(_PERMIT_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));\\n\\n        bytes32 hash = _hashTypedDataV4(structHash);\\n\\n        address signer = ECDSAUpgradeable.recover(hash, v, r, s);\\n        require(signer == owner, \\\"ERC20Permit: invalid signature\\\");\\n\\n        _approve(owner, spender, value);\\n    }\\n\\n    function transferWithAuthorization(\\n        address owner,\\n        address spender,\\n        uint256 value,\\n        uint256 deadline,\\n        uint8 v,\\n        bytes32 r,\\n        bytes32 s\\n    ) external virtual {\\n        require(block.timestamp <= deadline, \\\"ERC20TWA: expired deadline\\\");\\n\\n        bytes32 structHash = keccak256(abi.encode(_TWA_TYPEHASH, owner, spender, value, _useNonce(owner), deadline));\\n\\n        bytes32 hash = _hashTypedDataV4(structHash);\\n\\n        address signer = ECDSAUpgradeable.recover(hash, v, r, s);\\n        require(signer == owner, \\\"ERC20TWA: invalid signature:\\\");\\n\\n        _transfer(owner, spender, value);\\n    }\\n\\n    /**\\n     * @dev See {IERC20Permit-nonces}.\\n     */\\n    function nonces(address owner) public view virtual returns (uint256) {\\n        return _nonces[owner].current();\\n    }\\n\\n    /**\\n     * @dev See {IERC20Permit-DOMAIN_SEPARATOR}.\\n     */\\n    // solhint-disable-next-line func-name-mixedcase\\n    function DOMAIN_SEPARATOR() external view returns (bytes32) {\\n        return _domainSeparatorV4();\\n    }\\n\\n    /**\\n     * @dev \\\"Consume a nonce\\\": return the current value and increment.\\n     *\\n     * _Available since v4.1._\\n     */\\n    function _useNonce(address owner) internal virtual returns (uint256 current) {\\n        CountersUpgradeable.Counter storage nonce = _nonces[owner];\\n        current = nonce.current();\\n        nonce.increment();\\n    }\\n    uint256[49] private __gap;\\n}\\n\\n\\n// File Contracts/Token.sol\\n\\n/**\\n *\\n * Copyright (c) 2023 SCEME SAS\\n *\\n * Permission is hereby granted, free of charge, to any person obtaining a copy\\n * of this software and associated documentation files (the \\\"Software\\\"), to deal\\n * in the Software without restriction, including without limitation the rights\\n * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\\n * copies of the Software, and to permit persons to whom the Software is\\n * furnished to do so, subject to the following conditions:\\n *\\n * The above copyright notice and this permission notice shall be included in\\n * copies or substantial portions of the Software.\\n *\\n * THE SOFTWARE IS PROVIDED \\\"AS IS\\\", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\\n * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\\n * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\\n * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\\n * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,\\n * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE\\n * SOFTWARE.\\n */\\n\\npragma solidity ^0.8.0;\\n\\n\\n\\n\\n\\ncontract EUROPToken is \\n            Initializable, \\n            ERC20PresetMinterPauserUpgradeable,\\n            ERC20MetaTxUpgradeable, \\n            Blacklistable, \\n            UUPSUpgradeable {\\n\\n    bytes32 public constant ADMIN = keccak256('ADMIN');\\n    bytes32 public constant MASTER_MINTER = keccak256('MASTER_MINTER');\\n\\n    mapping(address => uint256) public minterAllowed;\\n\\n    address private _trustedForwarder;\\n    address private _feesFaucet;\\n\\n    uint256 private _txfeeRate;\\n    uint256 private _gaslessBasefee;\\n\\n    uint8 constant DECIMALS = 6;\\n    uint256 constant FEE_RATIO = 10000;\\n\\n    event Mint(address indexed minter, address indexed to, uint256 amount);\\n    event MinterConfigured(address indexed minter, uint256 minterAllowedAmount);\\n    event FeeFaucetUpdated(address newFeeFaucet);\\n    event TxFeeRateUpdated(uint256 newTxFeeRate);\\n    event GaslessBasefeeUpdated(uint256 newGaslessBasefee);\\n    event TrustedForwarderUpdated(address newTrustedForwarder);\\n\\n    /// @custom:oz-upgrades-unsafe-allow constructor\\n    constructor() initializer {}\\n\\n    function initializeEUROP() initializer public {\\n        __ERC20PresetMinterPauser_init(unicode\\\"EURØP\\\", \\\"EUROP\\\");\\n        __ERC20MetaTx_init(\\\"EUROP\\\");\\n        __UUPSUpgradeable_init();\\n        __Ownable_init();\\n\\n        _setRoleAdmin(MINTER_ROLE, MASTER_MINTER);\\n        _setupRole(ADMIN, address(0));\\n        _setupRole(MASTER_MINTER, address(0));\\n\\n        _txfeeRate = 0;\\n        _gaslessBasefee = 0;\\n    }\\n\\n    function decimals() public view virtual override returns (uint8) {\\n        return DECIMALS;\\n    }\\n\\n    /**\\n     * @dev Function to update the admin\\n     * @param newAdmin The address of the admin\\n     */\\n    function setAdministrator(address newAdmin) onlyOwner\\n      public virtual\\n    {\\n         revokeRole(ADMIN, getRoleMember(ADMIN, 0));\\n         revokeRole(PAUSER_ROLE, getRoleMember(PAUSER_ROLE, 0));  \\n         grantRole(ADMIN, newAdmin);\\n         grantRole(PAUSER_ROLE, newAdmin);\\n         updateBlacklister(newAdmin);\\n    }\\n\\n    /**\\n      * @dev Function to update the masterMinter\\n      * @param newMasterMinter The address of the masterMinter\\n      */\\n    function setMasterMinter(address newMasterMinter)\\n      public virtual\\n    {\\n        revokeRole(MASTER_MINTER, getRoleMember(MASTER_MINTER, 0)); \\n        grantRole(MASTER_MINTER, newMasterMinter);\\n    }\\n    /**\\n      * @dev Ignore this function, it's just to test the upgradeability logic\\n      */\\n    function doNothing() public pure returns(bool){\\n        return true;\\n    }\\n\\n    /**\\n      * @dev Override ownable implementation to make sure the new owner is also the new admin\\n      * @param newOwner The address of the owner\\n      */\\n    function transferOwnership(address newOwner) public override onlyOwner {\\n        setOwner(newOwner);\\n    }\\n\\n    /**\\n      * @dev Function to update the DEFAULT_ADMIN_ROLE and owner\\n      * @param newOwner The address of the owner\\n      */\\n    function setOwner(address newOwner)\\n        public virtual\\n    { \\n        // Sanity check\\n        if(newOwner == address(0) || newOwner == owner()) return;\\n        \\n        grantRole(DEFAULT_ADMIN_ROLE, newOwner);//_owner\\n        revokeRole(DEFAULT_ADMIN_ROLE, getRoleMember(DEFAULT_ADMIN_ROLE, 0));\\n        super.transferOwnership(newOwner);\\n    }\\n    \\n    function _authorizeUpgrade(address newImplementation)\\n        internal\\n        onlyRole(DEFAULT_ADMIN_ROLE)\\n        override\\n    {}\\n\\n    /**\\n     * @dev Function to set feesFaucet\\n     * @param feesFaucet New feesFaucet address\\n     */\\n    function setFeeFaucet(address feesFaucet) external onlyRole(ADMIN){\\n        require(feesFaucet != address(0), \\\"EUROP: new feesFaucet can't be address 0\\\");\\n        _feesFaucet = feesFaucet;\\n        emit FeeFaucetUpdated(feesFaucet);\\n    }\\n\\n\\n    /**\\n     * @dev Function to update tx fee rate\\n     * @param newRate The address of the minter\\n     */\\n    function updateTxFeeRate(uint256 newRate) external onlyRole(ADMIN){\\n        require(newRate <= FEE_RATIO, \\\"EUROP: new rate too high\\\"); //out of 10000\\n        _txfeeRate = newRate;\\n        emit TxFeeRateUpdated(_txfeeRate);\\n    }\\n\\n    /**\\n     * @dev Function to update tx fee rate\\n     */\\n    function getTxFeeRate() public view returns(uint256){\\n        return _txfeeRate;\\n    }\\n\\n    /**\\n     * @dev Function to calculate fees\\n     * @param txAmount amount of the transaction in eurus\\n     */\\n    function calculateTxFee(uint256 txAmount) public view returns(uint256){\\n        return txAmount * _txfeeRate / FEE_RATIO;\\n    }\\n\\n    /**\\n     * @dev Function to trigger tx fee payment to feesFaucet (internal)\\n     * @param from The address of the payer\\n     * @param txAmount amount of the transaction in eurus\\n     */\\n    function _payTxFee(address from, uint256 txAmount) internal returns(bool) {\\n        uint256 txFees = calculateTxFee(txAmount);\\n        require(balanceOf(from) >= txFees + txAmount, \\\"EUROP: tx fees\\\");\\n        if (_feesFaucet != address(0)){\\n            _transfer(from, _feesFaucet, txFees); \\n        } \\n        return true;\\n    }\\n\\n    /**\\n     * @dev Function to update gasless tx basefee \\n     * @param newBaseFee new gasless basefee amount\\n     */\\n    function updateGaslessBasefee(uint256 newBaseFee) external onlyRole(ADMIN){\\n        _gaslessBasefee = newBaseFee;\\n        emit GaslessBasefeeUpdated(newBaseFee);\\n    }\\n\\n    /**\\n     * @dev Function to get gasless basefee\\n     */\\n    function getGaslessBasefee() public view returns(uint256){\\n        return _gaslessBasefee;\\n    }\\n\\n    /**\\n     * @dev Function to trigger gaslessBasefee payment from payer to paymaster\\n     * Can only be called from trustedForwarder\\n     * @param payer Address of basefee payer (meta-tx signer)\\n     * @param paymaster Address of paymester (meta-tx executer)\\n     */\\n    function payGaslessBasefee(address payer, address paymaster) external {\\n        require(isTrustedForwarder(msg.sender), \\n                \\\"EUROP: only trustedForwarder can process gasless basefee payment\\\");\\n        require(balanceOf(payer) >= _gaslessBasefee, \\n                \\\"EUROP: balance too low, can't pay gasless basefee\\\");\\n        uint256 feeRate = _txfeeRate;\\n        _txfeeRate = 0;\\n        _transfer(payer, paymaster, _gaslessBasefee);\\n        _txfeeRate = feeRate;\\n    }\\n\\n\\n    /**\\n     * @dev Function to add/update a new minter\\n     * @param minter The address of the minter\\n     * @param minterAllowedAmount The minting amount allowed for the minter\\n     */\\n    function addMinter(address minter, uint256 minterAllowedAmount) external virtual\\n    {\\n        minterAllowed[minter] = minterAllowedAmount;\\n        grantRole(MINTER_ROLE, minter);\\n    }\\n\\n    /**\\n     * @dev Function to remove a minter\\n     * @param minter The address of the minter to remove\\n     */\\n    function removeMinter(address minter) external virtual\\n    {\\n        minterAllowed[minter] = 0;\\n        revokeRole(MINTER_ROLE, minter);\\n    }\\n\\n    /**\\n     * @dev Function to update the minting allowance of a minter\\n     * @param minter The address of the minter\\n     * @param minterAllowedAmount The new minting amount allowed for the minter\\n     */\\n    function updateMintingAllowance(address minter, uint256 minterAllowedAmount)\\n     external virtual onlyRole(MASTER_MINTER)\\n    {\\n        require(hasRole(MINTER_ROLE, minter), \\\"EUROP: only minter can have minting allowance\\\");\\n        minterAllowed[minter] = minterAllowedAmount;\\n    }\\n\\n    /**\\n     * @dev Function to mint tokens\\n     * @param to The address that will receive the minted tokens.\\n     * @param amount The amount of tokens to mint. Must be less than or equal\\n     * to the minterAllowance of the caller.\\n     */\\n    function mint(address to, uint256 amount)\\n        public\\n        whenNotPaused\\n        notBlacklisted(to)\\n        override\\n    {\\n        require((hasRole(MASTER_MINTER, _msgSender()) \\n                || hasRole(MINTER_ROLE, _msgSender())),\\n             \\\"EUROP: not allowed to mint\\\");\\n        require(amount > 0, \\\"EUROP: mint amount not greater than 0\\\");\\n\\n        // MINTER_ROLE allowance management\\n        if(hasRole(MINTER_ROLE, _msgSender())) {\\n            uint256 mintingAllowedAmount = minterAllowed[_msgSender()];\\n            require(\\n                amount <= mintingAllowedAmount,\\n                \\\"EUROP: mint amount exceeds minterAllowance\\\"\\n            );\\n            minterAllowed[_msgSender()] = mintingAllowedAmount - amount ;\\n        }\\n\\n        _mint(to, amount);\\n        emit Mint(_msgSender(), to, amount);\\n    }\\n\\n    \\n    /**\\n     * @dev allows a minter to burn some of its own tokens\\n     * Validates that caller is a minter and that sender is not blacklisted\\n     * amount is less than or equal to the minter's account balance\\n     * @param amount uint256 the amount of tokens to be burned\\n     */\\n    function burn(uint256 amount)\\n        public virtual override\\n        whenNotPaused\\n        notBlacklisted(_msgSender())\\n    {\\n        require((hasRole(MASTER_MINTER, _msgSender()) \\n                || hasRole(MINTER_ROLE, _msgSender()))\\n        ,\\\"EUROP: not allowed to burn\\\");\\n        _burn(_msgSender(), amount);\\n    }\\n\\n    function _beforeTokenTransfer(address from, address to, uint256 amount)\\n        internal virtual override(ERC20Upgradeable, ERC20PresetMinterPauserUpgradeable)\\n    {\\n        super._beforeTokenTransfer(from, to, amount);\\n    }\\n\\n    function _transfer(\\n        address sender,\\n        address recipient,\\n        uint256 amount\\n    ) internal virtual override\\n        notBlacklisted(sender) \\n        notBlacklisted(recipient)\\n    {\\n        if(_txfeeRate > 0 && recipient != _feesFaucet) _payTxFee(sender, amount);\\n        super._transfer(sender, recipient, amount);\\n    }\\n\\n    /**\\n     * @dev force a transfer from any account to any account\\n     * Validates that caller is the admin\\n     * @param from address the account from which to send\\n     * @param to address the account that will receive the tokens\\n     * @param amount uint256 the amount of token to send \\n     */\\n    function forceTransfer(address from, address to, uint256 amount)\\n        external virtual onlyRole(ADMIN)\\n    {\\n        super._transfer(from, to, amount);\\n    }\\n\\n    /**\\n     * @dev Function to update trustedForwarder\\n     * @param trustedForwarder Address of new trustedForwarder\\n     */\\n    function setTrustedForwarder(address trustedForwarder) external onlyRole(ADMIN) {\\n        require(trustedForwarder != address(0), \\\"EUROP: new trustedForwarder can't be address 0\\\");\\n        _trustedForwarder = trustedForwarder;\\n        emit TrustedForwarderUpdated(_trustedForwarder);\\n    }\\n\\n    /**\\n     * @dev Function to check if caller is a trusted Forwarder\\n     * @param forwarder The address of the forwarder\\n     */\\n    function isTrustedForwarder(address forwarder) public view virtual returns (bool) {\\n        return forwarder == _trustedForwarder;\\n    }\\n\\n    function _msgSender() internal view virtual override returns (address sender) {\\n        if (isTrustedForwarder(msg.sender)) {\\n            assembly {\\n                sender := shr(96, calldataload(sub(calldatasize(), 20)))\\n            }\\n        } else {\\n            return super._msgSender();\\n        }\\n    }\\n\\n    function _msgData() internal view virtual override returns (bytes calldata) {\\n        if (isTrustedForwarder(msg.sender)) {\\n            return msg.data[:msg.data.length - 20];\\n        } else {\\n            return super._msgData();\\n        }\\n    }\\n}\\n\"}},\"settings\":{\"optimizer\":{\"enabled\":true,\"runs\":1000},\"outputSelection\":{\"token.sol\":{\"EUROPToken\":[\"*\"]},\"*\":{\"*\":[\"abi\",\"evm.bytecode\",\"evm.deployedBytecode\",\"evm.methodIdentifiers\",\"metadata\",\"devdoc\",\"userdoc\",\"storageLayout\",\"evm.gasEstimates\"],\"\":[\"ast\"]}}}}}","ABI":"[{\"inputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"constructor\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":false,\"internalType\":\"address\",\"name\":\"previousAdmin\",\"type\":\"address\"},{\"indexed\":false,\"internalType\":\"address\",\"name\":\"newAdmin\",\"type\":\"address\"}],\"name\":\"AdminChanged\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":true,\"internalType\":\"address\",\"name\":\"owner\",\"type\":\"address\"},{\"indexed\":true,\"internalType\":\"address\",\"name\":\"spender\",\"type\":\"address\"},{\"indexed\":false,\"internalType\":\"uint256\",\"name\":\"value\",\"type\":\"uint256\"}],\"name\":\"Approval\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":true,\"internalType\":\"address\",\"name\":\"beacon\",\"type\":\"address\"}],\"name\":\"BeaconUpgraded\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":true,\"internalType\":\"address\",\"name\":\"_account\",\"type\":\"address\"}],\"name\":\"Blacklisted\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":true,\"internalType\":\"address\",\"name\":\"newBlacklister\",\"type\":\"address\"}],\"name\":\"BlacklisterChanged\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[],\"name\":\"EIP712DomainChanged\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":false,\"internalType\":\"address\",\"name\":\"newFeeFaucet\",\"type\":\"address\"}],\"name\":\"FeeFaucetUpdated\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":false,\"internalType\":\"uint256\",\"name\":\"newGaslessBasefee\",\"type\":\"uint256\"}],\"name\":\"GaslessBasefeeUpdated\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":false,\"internalType\":\"uint8\",\"name\":\"version\",\"type\":\"uint8\"}],\"name\":\"Initialized\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":true,\"internalType\":\"address\",\"name\":\"minter\",\"type\":\"address\"},{\"indexed\":true,\"internalType\":\"address\",\"name\":\"to\",\"type\":\"address\"},{\"indexed\":false,\"internalType\":\"uint256\",\"name\":\"amount\",\"type\":\"uint256\"}],\"name\":\"Mint\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":true,\"internalType\":\"address\",\"name\":\"minter\",\"type\":\"address\"},{\"indexed\":false,\"internalType\":\"uint256\",\"name\":\"minterAllowedAmount\",\"type\":\"uint256\"}],\"name\":\"MinterConfigured\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":true,\"internalType\":\"address\",\"name\":\"previousOwner\",\"type\":\"address\"},{\"indexed\":true,\"internalType\":\"address\",\"name\":\"newOwner\",\"type\":\"address\"}],\"name\":\"OwnershipTransferred\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":false,\"internalType\":\"address\",\"name\":\"account\",\"type\":\"address\"}],\"name\":\"Paused\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":true,\"internalType\":\"bytes32\",\"name\":\"role\",\"type\":\"bytes32\"},{\"indexed\":true,\"internalType\":\"bytes32\",\"name\":\"previousAdminRole\",\"type\":\"bytes32\"},{\"indexed\":true,\"internalType\":\"bytes32\",\"name\":\"newAdminRole\",\"type\":\"bytes32\"}],\"name\":\"RoleAdminChanged\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":true,\"internalType\":\"bytes32\",\"name\":\"role\",\"type\":\"bytes32\"},{\"indexed\":true,\"internalType\":\"address\",\"name\":\"account\",\"type\":\"address\"},{\"indexed\":true,\"internalType\":\"address\",\"name\":\"sender\",\"type\":\"address\"}],\"name\":\"RoleGranted\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":true,\"internalType\":\"bytes32\",\"name\":\"role\",\"type\":\"bytes32\"},{\"indexed\":true,\"internalType\":\"address\",\"name\":\"account\",\"type\":\"address\"},{\"indexed\":true,\"internalType\":\"address\",\"name\":\"sender\",\"type\":\"address\"}],\"name\":\"RoleRevoked\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":true,\"internalType\":\"address\",\"name\":\"from\",\"type\":\"address\"},{\"indexed\":true,\"internalType\":\"address\",\"name\":\"to\",\"type\":\"address\"},{\"indexed\":false,\"internalType\":\"uint256\",\"name\":\"value\",\"type\":\"uint256\"}],\"name\":\"Transfer\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":false,\"internalType\":\"address\",\"name\":\"newTrustedForwarder\",\"type\":\"address\"}],\"name\":\"TrustedForwarderUpdated\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":false,\"internalType\":\"uint256\",\"name\":\"newTxFeeRate\",\"type\":\"uint256\"}],\"name\":\"TxFeeRateUpdated\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":true,\"internalType\":\"address\",\"name\":\"_account\",\"type\":\"address\"}],\"name\":\"UnBlacklisted\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":false,\"internalType\":\"address\",\"name\":\"account\",\"type\":\"address\"}],\"name\":\"Unpaused\",\"type\":\"event\"},{\"anonymous\":false,\"inputs\":[{\"indexed\":true,\"internalType\":\"address\",\"name\":\"implementation\",\"type\":\"address\"}],\"name\":\"Upgraded\",\"type\":\"event\"},{\"inputs\":[],\"name\":\"ADMIN\",\"outputs\":[{\"internalType\":\"bytes32\",\"name\":\"\",\"type\":\"bytes32\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"DEFAULT_ADMIN_ROLE\",\"outputs\":[{\"internalType\":\"bytes32\",\"name\":\"\",\"type\":\"bytes32\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"DOMAIN_SEPARATOR\",\"outputs\":[{\"internalType\":\"bytes32\",\"name\":\"\",\"type\":\"bytes32\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"MASTER_MINTER\",\"outputs\":[{\"internalType\":\"bytes32\",\"name\":\"\",\"type\":\"bytes32\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"MINTER_ROLE\",\"outputs\":[{\"internalType\":\"bytes32\",\"name\":\"\",\"type\":\"bytes32\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"PAUSER_ROLE\",\"outputs\":[{\"internalType\":\"bytes32\",\"name\":\"\",\"type\":\"bytes32\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"minter\",\"type\":\"address\"},{\"internalType\":\"uint256\",\"name\":\"minterAllowedAmount\",\"type\":\"uint256\"}],\"name\":\"addMinter\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"owner\",\"type\":\"address\"},{\"internalType\":\"address\",\"name\":\"spender\",\"type\":\"address\"}],\"name\":\"allowance\",\"outputs\":[{\"internalType\":\"uint256\",\"name\":\"\",\"type\":\"uint256\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"spender\",\"type\":\"address\"},{\"internalType\":\"uint256\",\"name\":\"amount\",\"type\":\"uint256\"}],\"name\":\"approve\",\"outputs\":[{\"internalType\":\"bool\",\"name\":\"\",\"type\":\"bool\"}],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"account\",\"type\":\"address\"}],\"name\":\"balanceOf\",\"outputs\":[{\"internalType\":\"uint256\",\"name\":\"\",\"type\":\"uint256\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"account\",\"type\":\"address\"}],\"name\":\"blacklist\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"blacklister\",\"outputs\":[{\"internalType\":\"address\",\"name\":\"\",\"type\":\"address\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"uint256\",\"name\":\"amount\",\"type\":\"uint256\"}],\"name\":\"burn\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"account\",\"type\":\"address\"},{\"internalType\":\"uint256\",\"name\":\"amount\",\"type\":\"uint256\"}],\"name\":\"burnFrom\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"uint256\",\"name\":\"txAmount\",\"type\":\"uint256\"}],\"name\":\"calculateTxFee\",\"outputs\":[{\"internalType\":\"uint256\",\"name\":\"\",\"type\":\"uint256\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"decimals\",\"outputs\":[{\"internalType\":\"uint8\",\"name\":\"\",\"type\":\"uint8\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"spender\",\"type\":\"address\"},{\"internalType\":\"uint256\",\"name\":\"subtractedValue\",\"type\":\"uint256\"}],\"name\":\"decreaseAllowance\",\"outputs\":[{\"internalType\":\"bool\",\"name\":\"\",\"type\":\"bool\"}],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"doNothing\",\"outputs\":[{\"internalType\":\"bool\",\"name\":\"\",\"type\":\"bool\"}],\"stateMutability\":\"pure\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"eip712Domain\",\"outputs\":[{\"internalType\":\"bytes1\",\"name\":\"fields\",\"type\":\"bytes1\"},{\"internalType\":\"string\",\"name\":\"name\",\"type\":\"string\"},{\"internalType\":\"string\",\"name\":\"version\",\"type\":\"string\"},{\"internalType\":\"uint256\",\"name\":\"chainId\",\"type\":\"uint256\"},{\"internalType\":\"address\",\"name\":\"verifyingContract\",\"type\":\"address\"},{\"internalType\":\"bytes32\",\"name\":\"salt\",\"type\":\"bytes32\"},{\"internalType\":\"uint256[]\",\"name\":\"extensions\",\"type\":\"uint256[]\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"from\",\"type\":\"address\"},{\"internalType\":\"address\",\"name\":\"to\",\"type\":\"address\"},{\"internalType\":\"uint256\",\"name\":\"amount\",\"type\":\"uint256\"}],\"name\":\"forceTransfer\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"getGaslessBasefee\",\"outputs\":[{\"internalType\":\"uint256\",\"name\":\"\",\"type\":\"uint256\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"bytes32\",\"name\":\"role\",\"type\":\"bytes32\"}],\"name\":\"getRoleAdmin\",\"outputs\":[{\"internalType\":\"bytes32\",\"name\":\"\",\"type\":\"bytes32\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"bytes32\",\"name\":\"role\",\"type\":\"bytes32\"},{\"internalType\":\"uint256\",\"name\":\"index\",\"type\":\"uint256\"}],\"name\":\"getRoleMember\",\"outputs\":[{\"internalType\":\"address\",\"name\":\"\",\"type\":\"address\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"bytes32\",\"name\":\"role\",\"type\":\"bytes32\"}],\"name\":\"getRoleMemberCount\",\"outputs\":[{\"internalType\":\"uint256\",\"name\":\"\",\"type\":\"uint256\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"getTxFeeRate\",\"outputs\":[{\"internalType\":\"uint256\",\"name\":\"\",\"type\":\"uint256\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"bytes32\",\"name\":\"role\",\"type\":\"bytes32\"},{\"internalType\":\"address\",\"name\":\"account\",\"type\":\"address\"}],\"name\":\"grantRole\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"bytes32\",\"name\":\"role\",\"type\":\"bytes32\"},{\"internalType\":\"address\",\"name\":\"account\",\"type\":\"address\"}],\"name\":\"hasRole\",\"outputs\":[{\"internalType\":\"bool\",\"name\":\"\",\"type\":\"bool\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"spender\",\"type\":\"address\"},{\"internalType\":\"uint256\",\"name\":\"addedValue\",\"type\":\"uint256\"}],\"name\":\"increaseAllowance\",\"outputs\":[{\"internalType\":\"bool\",\"name\":\"\",\"type\":\"bool\"}],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"string\",\"name\":\"name\",\"type\":\"string\"},{\"internalType\":\"string\",\"name\":\"symbol\",\"type\":\"string\"}],\"name\":\"initialize\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"initializeEUROP\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"account\",\"type\":\"address\"}],\"name\":\"isBlacklisted\",\"outputs\":[{\"internalType\":\"bool\",\"name\":\"\",\"type\":\"bool\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"forwarder\",\"type\":\"address\"}],\"name\":\"isTrustedForwarder\",\"outputs\":[{\"internalType\":\"bool\",\"name\":\"\",\"type\":\"bool\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"to\",\"type\":\"address\"},{\"internalType\":\"uint256\",\"name\":\"amount\",\"type\":\"uint256\"}],\"name\":\"mint\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"\",\"type\":\"address\"}],\"name\":\"minterAllowed\",\"outputs\":[{\"internalType\":\"uint256\",\"name\":\"\",\"type\":\"uint256\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"name\",\"outputs\":[{\"internalType\":\"string\",\"name\":\"\",\"type\":\"string\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"owner\",\"type\":\"address\"}],\"name\":\"nonces\",\"outputs\":[{\"internalType\":\"uint256\",\"name\":\"\",\"type\":\"uint256\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"owner\",\"outputs\":[{\"internalType\":\"address\",\"name\":\"\",\"type\":\"address\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"pause\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"paused\",\"outputs\":[{\"internalType\":\"bool\",\"name\":\"\",\"type\":\"bool\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"payer\",\"type\":\"address\"},{\"internalType\":\"address\",\"name\":\"paymaster\",\"type\":\"address\"}],\"name\":\"payGaslessBasefee\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"owner\",\"type\":\"address\"},{\"internalType\":\"address\",\"name\":\"spender\",\"type\":\"address\"},{\"internalType\":\"uint256\",\"name\":\"value\",\"type\":\"uint256\"},{\"internalType\":\"uint256\",\"name\":\"deadline\",\"type\":\"uint256\"},{\"internalType\":\"uint8\",\"name\":\"v\",\"type\":\"uint8\"},{\"internalType\":\"bytes32\",\"name\":\"r\",\"type\":\"bytes32\"},{\"internalType\":\"bytes32\",\"name\":\"s\",\"type\":\"bytes32\"}],\"name\":\"permit\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"proxiableUUID\",\"outputs\":[{\"internalType\":\"bytes32\",\"name\":\"\",\"type\":\"bytes32\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"minter\",\"type\":\"address\"}],\"name\":\"removeMinter\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"renounceOwnership\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"bytes32\",\"name\":\"role\",\"type\":\"bytes32\"},{\"internalType\":\"address\",\"name\":\"account\",\"type\":\"address\"}],\"name\":\"renounceRole\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"bytes32\",\"name\":\"role\",\"type\":\"bytes32\"},{\"internalType\":\"address\",\"name\":\"account\",\"type\":\"address\"}],\"name\":\"revokeRole\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"newAdmin\",\"type\":\"address\"}],\"name\":\"setAdministrator\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"feesFaucet\",\"type\":\"address\"}],\"name\":\"setFeeFaucet\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"newMasterMinter\",\"type\":\"address\"}],\"name\":\"setMasterMinter\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"newOwner\",\"type\":\"address\"}],\"name\":\"setOwner\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"trustedForwarder\",\"type\":\"address\"}],\"name\":\"setTrustedForwarder\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"bytes4\",\"name\":\"interfaceId\",\"type\":\"bytes4\"}],\"name\":\"supportsInterface\",\"outputs\":[{\"internalType\":\"bool\",\"name\":\"\",\"type\":\"bool\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"symbol\",\"outputs\":[{\"internalType\":\"string\",\"name\":\"\",\"type\":\"string\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"totalSupply\",\"outputs\":[{\"internalType\":\"uint256\",\"name\":\"\",\"type\":\"uint256\"}],\"stateMutability\":\"view\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"to\",\"type\":\"address\"},{\"internalType\":\"uint256\",\"name\":\"amount\",\"type\":\"uint256\"}],\"name\":\"transfer\",\"outputs\":[{\"internalType\":\"bool\",\"name\":\"\",\"type\":\"bool\"}],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"from\",\"type\":\"address\"},{\"internalType\":\"address\",\"name\":\"to\",\"type\":\"address\"},{\"internalType\":\"uint256\",\"name\":\"amount\",\"type\":\"uint256\"}],\"name\":\"transferFrom\",\"outputs\":[{\"internalType\":\"bool\",\"name\":\"\",\"type\":\"bool\"}],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"newOwner\",\"type\":\"address\"}],\"name\":\"transferOwnership\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"owner\",\"type\":\"address\"},{\"internalType\":\"address\",\"name\":\"spender\",\"type\":\"address\"},{\"internalType\":\"uint256\",\"name\":\"value\",\"type\":\"uint256\"},{\"internalType\":\"uint256\",\"name\":\"deadline\",\"type\":\"uint256\"},{\"internalType\":\"uint8\",\"name\":\"v\",\"type\":\"uint8\"},{\"internalType\":\"bytes32\",\"name\":\"r\",\"type\":\"bytes32\"},{\"internalType\":\"bytes32\",\"name\":\"s\",\"type\":\"bytes32\"}],\"name\":\"transferWithAuthorization\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"account\",\"type\":\"address\"}],\"name\":\"unBlacklist\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[],\"name\":\"unpause\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"uint256\",\"name\":\"newBaseFee\",\"type\":\"uint256\"}],\"name\":\"updateGaslessBasefee\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"minter\",\"type\":\"address\"},{\"internalType\":\"uint256\",\"name\":\"minterAllowedAmount\",\"type\":\"uint256\"}],\"name\":\"updateMintingAllowance\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"uint256\",\"name\":\"newRate\",\"type\":\"uint256\"}],\"name\":\"updateTxFeeRate\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"newImplementation\",\"type\":\"address\"}],\"name\":\"upgradeTo\",\"outputs\":[],\"stateMutability\":\"nonpayable\",\"type\":\"function\"},{\"inputs\":[{\"internalType\":\"address\",\"name\":\"newImplementation\",\"type\":\"address\"},{\"internalType\":\"bytes\",\"name\":\"data\",\"type\":\"bytes\"}],\"name\":\"upgradeToAndCall\",\"outputs\":[],\"stateMutability\":\"payable\",\"type\":\"function\"}]","ContractName":"EUROPToken","CompilerVersion":"v0.8.8+commit.dddeac2f","OptimizationUsed":"1","Runs":"1000","EVMVersion":"","Library":"","LicenseType":"1","Proxy":"0","Implementation":"","SwarmSource":""}]}